Replacing the battery in your GMC Yukon key fob is a straightforward process that can save you time and money. Whether you have a three-button, four-button, or five-button version, the steps to replace the battery are the same. In this guide, I will walk you through the process of changing the battery in your key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What You’ll Need
Before you start, gather the following items:
- Flathead screwdriver
- CR2032 battery
Step-by-Step Instructions
Locate the Indentation
The first step is to find the indentation on your key fob. Look at the bottom of your device, right next to where the key ring attaches. You’ll see a small indentation along the seam of the key fob.
Open the Key Fob
Insert your flathead screwdriver into the indentation and gently wiggle it. The key fob should pop open easily. If it’s a bit sticky, twist the screwdriver and pull it open with your fingers.
Remove the Battery
Once the key fob is open, you’ll have access to the battery. Carefully lift out the circuit board by pulling up on the battery. Be cautious not to touch the small components on the circuit board.
Slide the old battery out. If it’s difficult to remove, you can push on the bottom of the battery to help it slide out.
Insert the New Battery
Take your new CR2032 battery and ensure that the positive side (marked with a plus sign) is facing up. Slide the new battery into place.
Reassemble the Key Fob
Place the circuit board back into the front part of the key fob, with the battery facing up. Click the back part of the key fob into place. If it doesn’t go back together easily, make sure the rubber components are aligned correctly.
Once everything is aligned, squeeze the key fob back together until it clicks into place.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Additional Tips
If you have a different version of the key fob, such as the newer five-button version, the process is the same. The internal design might be slightly different, but the steps to replace the battery are identical.
For more detailed guides on other GMC key fobs, you can visit FobBattery’s GMC Acadia Key Fob Battery Replacement.
Why Replace the Battery Yourself?
Replacing the battery in your key fob yourself can save you time and money. There’s no need to visit a dealership or a professional locksmith. With just a few simple tools and a new battery, you can have your key fob working like new in under five minutes.
Common Issues and Troubleshooting
Key Fob Not Opening
If your key fob is not opening easily, double-check the indentation and make sure you’re inserting the screwdriver correctly. Sometimes, wiggling the screwdriver a bit more can help.
Battery Not Fitting
If the new battery isn’t fitting properly, ensure that the positive side is facing up. Also, check that there are no obstructions in the battery compartment.
Key Fob Not Clicking Back Together
If the key fob isn’t clicking back together, make sure the rubber components are aligned correctly. Sometimes, the rubber can get misaligned, preventing the key fob from closing properly.
FAQ
What type of battery does the GMC Yukon key fob use?
The GMC Yukon key fob uses a CR2032 battery.
How often should I replace the battery in my key fob?
It’s a good idea to replace the battery in your key fob every 1-2 years, or as soon as you notice the range decreasing.
Can I use a different type of battery?
No, it’s important to use a CR2032 battery to ensure compatibility and proper functioning of your key fob.
What should I do if my key fob still isn’t working after replacing the battery?
If your key fob isn’t working after replacing the battery, double-check that the battery is installed correctly with the positive side facing up. If it still doesn’t work, there might be an issue with the key fob itself, and you may need to consult a professional.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your GMC Yukon key fob is a simple process that can be done at home with minimal tools. By following these steps, you can ensure that your key fob continues to work properly without the need for professional assistance. For more guides and information on key fob batteries, visit FobBattery.