Introduction
Replacing the battery in your GMC Yukon key fob is a simple task that you can do yourself. This guide will walk you through the process step-by-step. Whether you have the four, five, or six-button version, the procedure is the same.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before we start, gather the necessary tools and materials. You’ll need a flathead screwdriver and a CR2032 battery. If you don’t have a CR2032 battery, you can purchase one online.
- Flathead screwdriver
- CR2032 battery
If you need to buy a CR2032 battery, you can find it here.
Step-by-Step Guide
Step 1: Open the Key Fob
First, flip your key fob over and locate the indentation near the key ring. This is where you will insert your flathead screwdriver.
Insert the screwdriver into the slot and twist it gently. This will release the tab on one side. Repeat the process on the other side to fully open the key fob.
Step 2: Remove the Old Battery
Once the key fob is open, you will see the battery. Use your flathead screwdriver to pry the battery out. Insert the screwdriver into the gap between the battery and the plastic wall and gently lift it out.
Step 3: Insert the New Battery
Take your new CR2032 battery and make sure the positive side (marked with a plus sign) is facing up. Slide it into the slot, starting with the bottom part of the battery, and then press it down until it clicks into place.
Step 4: Reassemble the Key Fob
Align the back cover with the top part of the key fob and press down until it clicks back into place. Ensure all tabs are securely fastened.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Final Steps
Congratulations! You have successfully replaced the battery in your GMC Yukon key fob. This new battery should last you for years. By doing this yourself, you’ve saved both time and money.
If you found this guide helpful, feel free to let me know in the comments or by giving this post a like. For more information on key fob batteries, visit FobBattery.
FAQs
What type of battery does the GMC Yukon key fob use?
The GMC Yukon key fob uses a CR2032 battery.
Do all versions of the GMC Yukon key fob use the same battery?
Yes, regardless of whether you have the four, five, or six-button version, they all use the same CR2032 battery.
Can I use any flathead screwdriver?
Yes, any flathead screwdriver will work, but a precision screwdriver is recommended to avoid damaging the key fob.
How do I know if the battery is inserted correctly?
Ensure the positive side (with the plus sign) is facing up. Slide it into the slot and press down until it clicks into place.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, double-check that the battery is inserted correctly. If it still doesn’t work, you might need a new key fob.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon, or in other retail stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
For more guides on key fob battery replacements, visit GMC Acadia Key Fob Battery Replacement (2007 – 2017).