How to Replace the Battery in Your Hummer H2 Key Fob (2008-2009)

Introduction

Replacing the battery in your Hummer H2 key fob is an easy task that can be done at home. You don’t need any special tools, and the process takes under five minutes. This guide will walk you through the steps to replace the battery, ensuring your key fob functions properly.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What You’ll Need

  • Flathead screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can easily purchase one online.

Step-by-Step Instructions

Locate the Indentation

First, look at the bottom of your key fob, near the key ring attachment. There is an indentation along the seam in the plastic.

Insert the Screwdriver

Take your flathead screwdriver and insert it into the indentation. Wiggle it until it is firmly in place, then give it a twist. This will start to open the device.

Open the Key Fob

Once you feel the device start to open, you can pull it apart with your fingers. Be gentle to avoid damaging any components.

Remove the Battery

Lift up on the battery to remove it. The entire circuit board may come out with it. Handle the board by the sides to avoid damage.

Dispose of the Old Battery

Properly dispose of your old battery. Batteries should not be thrown in regular trash due to environmental concerns.

Insert the New Battery

Take your new CR2032 battery. Ensure the positive side with the plus sign is facing up. Slide it under the metal piece in the battery slot.

Reassemble the Key Fob

Drop the circuit board back into the front section of the device, with the battery facing up. Click the back section of plastic onto the device.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

With the new battery installed, your key fob should function for many years. If you found this guide helpful, feel free to leave a comment or like the video. For more tutorials on key fob batteries for various makes and models, visit our website or subscribe to our channel.

FAQ

How often should I replace the battery?

Typically, a CR2032 battery will last several years in a key fob. Replace it when the device starts to malfunction.

Can I use any other type of battery?

No, the key fob is designed to use a CR2032 battery. Using a different type may damage the device.

What if my key fob still doesn’t work?

If the key fob doesn’t work after replacing the battery, check for damage or consult a professional for further diagnosis.

Can I replace the battery without any tools?

You will need at least a flathead screwdriver to open the key fob. It’s a simple tool that most people have at home.

Is it safe to replace the battery myself?

Yes, replacing the battery is safe and straightforward. Just handle the circuit board carefully to avoid damage.

What should I do with the old battery?

Dispose of the old battery properly. Many stores offer battery recycling services. Do not throw it in regular trash.

Where can I buy a CR2032 battery?

You can purchase CR2032 batteries at most electronics stores or online.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.