How to Replace the Battery in Your Kia Soul Key Fob (2019 – 2021)

Introduction

Changing the battery in your Kia Soul key fob is a straightforward process. This guide will walk you through each step to ensure your key fob is functioning properly. We’ll cover everything from opening the key fob to replacing the battery and reassembling it.

Required Tools and Materials

Before you start, gather the necessary tools and materials. You will need:

• CR2032 battery
• Flathead screwdriver
• Precision Phillips head screwdriver

Step 1: Open the Key Fob

First, flip out the key from the fob and turn it over to the back. You will see a piece of plastic that needs to be removed. There is a seam between this plastic piece and the one beneath it.

Insert a flathead screwdriver into the seam. Push and wiggle the screwdriver until the back piece of plastic pops off. Be gentle to avoid damaging the plastic, which is durable but flexible.

Step 2: Remove the Screws

With the back piece of plastic removed, you will see a few screws that need to be taken out. Use a precision Phillips head screwdriver to remove these screws. Set them aside carefully to avoid losing them.

Once all the screws are removed, you can lift off the plastic piece to reveal the CR2032 battery.

Step 3: Remove the Old Battery

To remove the old battery, use a flathead screwdriver. Insert it into the small space between the battery and the plastic casing. Pry the battery up gently. It may pop out quickly, so be prepared to catch it.

Dispose of the old battery properly.

Step 4: Insert the New Battery

Take a new CR2032 battery and ensure the positive side is facing up. Slide it into place and click it down securely.

You can purchase a new CR2032 battery from Amazon.com if you don’t already have one.

Step 5: Reassemble the Key Fob

Position the plastic protector back over the battery. Using the precision screwdriver, screw each of the small screws back into place. Tighten them to a snug, finger-tight fit.

Once all screws are securely in place, align the back piece of plastic with the key fob and click it back into place. Ensure everything is tight and secure.

Final Checks

Close the key and test your key fob to make sure it’s working properly. If everything is functioning as expected, you’re all set!

Conclusion

Replacing the battery in your Kia Soul key fob is a simple process that can be done with minimal tools. By following these steps, you can ensure your key fob continues to work reliably.

If you found this guide helpful, feel free to share your experience or leave a comment. For more guides on changing key fob batteries for different makes and models, visit our website.

FAQ

What type of battery does the Kia Soul key fob use?

The Kia Soul key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

You will need a flathead screwdriver and a precision Phillips head screwdriver.

How often should I replace the key fob battery?

It’s recommended to replace the key fob battery every 1-2 years, or when you notice a decrease in range or response time.

What should I do if my key fob still doesn’t work after replacing the battery?

Ensure the battery is installed correctly with the positive side facing up. If it still doesn’t work, the key fob may need to be reprogrammed or replaced.

Can I use a different type of battery?

No, it’s important to use a CR2032 battery as other types may not fit or provide the correct voltage.

Is it possible to damage the key fob while replacing the battery?

If you follow the instructions carefully and use the correct tools, the risk of damaging the key fob is minimal.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.