How to Replace the Battery in Your Volvo XC60 Key Fob (2017 – 2018)

Introduction

Replacing the battery in your Volvo XC60 key fob is a straightforward task you can do at home. In this guide, I will walk you through the steps to replace the battery, ensuring your key fob is back to optimal performance. All you need is a flathead screwdriver and a CR2032 battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Gather Your Tools and Materials

Before starting, make sure you have the necessary tools and materials. You will need a flathead screwdriver and a CR2032 coin battery. These batteries are inexpensive and can be found online.

  • Flathead screwdriver
  • CR2032 coin battery

Opening the Key Fob

To begin, locate the switch on the bottom of the key fob, near the key ring. Hold this switch down while pulling the top part of the key fob. This section is known as the Volvo side. Push and pull to remove this plastic section and set it aside.

Accessing the Battery Compartment

Inside the key fob, you’ll find another switch. This switch is not on the metal part but on the plastic. Hold this switch down and perform the same push and pull motion to remove the back piece of plastic. Now you have access to the battery compartment.

Removing the Old Battery

In the compartment, you’ll see a tab with a picture of a battery. Use your flathead screwdriver to turn the tab until the arrow aligns with the “open” position. Gently push down and turn to open the compartment.

Next, find the small opening on the side of the battery. Insert the corner of your flathead screwdriver into this opening and gently pry the battery out. Dispose of the old battery properly.

Inserting the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Slide the battery under the plastic tab and click it into place. Make sure it is secure.

Reassembling the Key Fob

Once the new battery is in place, align the arrow with the “open” position and push the tab down. Twist the tab until it is in the “closed” position. Now, reattach the back piece of plastic by aligning the tabs with the key ring part and sliding it down until it clicks.

Repeat the same process for the other side with the Volvo logo. Ensure everything is locked up nicely and securely.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Congratulations! You have successfully replaced the battery in your Volvo XC60 key fob. This new battery should last for a long time, ensuring your key fob functions properly. If you found this guide helpful, feel free to leave a like or a comment.

Additional Resources

If you need further assistance with another key fob, I recommend visiting FobBattery for more tutorials and guides. You can also check out the Volvo Key Fobs Guide for detailed information on various Volvo models.

FAQs

What type of battery does the Volvo XC60 key fob use?

The Volvo XC60 key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Do I need any special tools to replace the battery?

No, you only need a regular flathead screwdriver to replace the battery.

How long does the new battery last?

The new CR2032 battery should last for a long time, depending on usage.

Can I replace the battery myself?

Yes, replacing the battery is a simple process that you can do at home by following this guide.

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, make sure the battery is properly installed with the positive side facing up. If the problem persists, consider visiting a professional for further assistance.

Where can I find more guides on key fob battery replacements?

For more guides and tutorials, visit FobBattery. They offer a comprehensive database of key fob battery replacement guides for various car models.

Thank you for following this guide. Your Volvo XC60 key fob should now be working perfectly with its new battery.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.