How to Replace the Chrysler Town & Country Key Fob Battery (2008 – 2016)

Introduction

Replacing the battery in your Chrysler Town & Country key fob is a simple task that you can do at home. This guide will show you how to replace the CR2032 battery in your key fob.

Tools and Materials Needed

To replace the battery in your key fob, you will need the following tools and materials:

• CR2032 battery
• Flathead screwdriver

You can get these batteries on Amazon.com for a few bucks.

Step-by-Step Guide

Follow these steps to replace the battery in your Chrysler Town & Country key fob:

Step 1: Open the Key Fob

First, locate the seam between the two halves of the key fob. This seam is near where the key ring attaches. Use your flathead screwdriver to push into the seam at the indentation. Twist the screwdriver until you feel a click. The key fob will start to separate.

Step 2: Separate the Key Fob Halves

Continue to work your way down the side of the key fob, twisting the screwdriver until the two halves come apart. Set the top half aside.

Step 3: Remove the Rubber Component

Inside the key fob, you will see a rubber component covering a circuit board. Carefully lift the rubber component and set it aside.

Step 4: Remove the Old Battery

Use your fingernail or the flathead screwdriver to carefully lift the old CR2032 battery out of the key fob. Dispose of the old battery properly.

Step 5: Insert the New Battery

Take a new CR2032 battery and ensure the positive side (with the text) is facing down. Position the battery so that it first goes into the metal component. Push it in until it clicks into place.

Step 6: Reassemble the Key Fob

Place the rubber component back over the circuit board. Align the two halves of the key fob and press them together until they click back into place.

Frequently Asked Questions

What type of battery does the Chrysler Town & Country key fob use?

The key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can buy a CR2032 battery on Amazon..

How often do I need to replace the key fob battery?

Typically, the battery lasts for a few years, but it depends on usage.

Can I use a different type of battery?

No, it is recommended to use a CR2032 battery for optimal performance.

What should I do if the key fob still doesn’t work after replacing the battery?

Ensure the battery is installed correctly. If the problem persists, consider consulting a professional.

Conclusion

Replacing the battery in your Chrysler Town & Country key fob is a quick and easy process. With a new CR2032 battery and a flathead screwdriver, you can have your key fob working like new in no time. For more information on key fob batteries, visit Amazon.com.