How to Replace the Honda Crosstour Key Battery

Introduction

Replacing the battery in your Honda Crosstour key is a straightforward task that you can do at home. This guide will walk you through each step to ensure you can complete the process with ease. Whether your key has stopped working or you just want to be prepared, this guide will help you get the job done efficiently.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Tools You’ll Need

Before you start, make sure you have all the necessary tools. This will make the process smoother and faster.

  • Small Phillips screwdriver
  • Flathead screwdriver
  • CR1620 coin battery

You can find a precision screwdriver set on Amazon for about $4.

Step-by-Step Guide

Step 1: Remove the Screw

First, flip the key over to locate the small Phillips screw on the back. Use your precision screwdriver to remove this screw. If it’s your first time, you may need to apply some pressure to loosen it. I’ve already loosened mine, so it comes out easily.

Step 2: Open the Key Fob

Once the screw is out, look for a small notch on the side of the key fob. Insert your flathead screwdriver into this notch. Twist the screwdriver to get leverage and snap off the back piece of the fob.

Step 3: Replace the Battery

Now that you have access to the battery, use your flathead screwdriver to pop it out. The battery you need is a CR1620 coin battery. When inserting the new battery, make sure to put the top part in first. The grippers at the bottom will hold it in place.

Step 4: Reassemble the Key Fob

After replacing the battery, snap the back piece of the key fob back into place. Finally, reinsert the small Phillips screw to secure everything. Your key should now be good as new.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Additional Tips

Here are some additional tips to make the process even easier:

  • Work on a clean, flat surface
  • Keep the screws and small parts in a container
  • Test the key before reassembling

These tips will help you avoid losing small parts and ensure that your key works properly before you put it back together.

Common Issues and Solutions

Difficulty Removing the Screw

If you find it hard to remove the screw, try using a different precision screwdriver. Some screws may be tighter than others, requiring more effort to loosen.

Key Fob Won’t Snap Back Together

If the key fob doesn’t snap back together easily, make sure the battery is seated correctly. Misalignment can prevent the back piece from fitting properly.

FAQs

What type of battery does the Honda Crosstour key use?

The Honda Crosstour key uses a CR1620 coin battery.

Where can I buy the replacement battery?

You can purchase the CR1620 battery on Amazon.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Do I need any special tools?

Yes, you’ll need a small Phillips screwdriver and a flathead screwdriver. A precision toolkit is recommended.

How long does it take to replace the battery?

The entire process should take less than 10 minutes.

Can I use a different type of battery?

No, it’s best to use the recommended CR1620 battery to ensure proper functionality.

Conclusion

Replacing the battery in your Honda Crosstour key is a simple task that can save you time and money. By following this guide, you can easily complete the process and ensure your key is functioning properly. Remember to keep the necessary tools handy and follow each step carefully. Happy DIYing!

Additional Resources

For more detailed guides and resources, visit this link. You’ll find comprehensive information to help you with various key fob issues.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.