How to Replace the Key Fob Battery for a 2009-2014 Ford F-150

Introduction

Replacing the key fob battery for your Ford F-150 from the years 2009 to 2014 is a simple task that anyone can perform. This guide will walk you through the steps to replace the battery in your key fob, ensuring your remote continues to function properly.

The key fob uses a CR2032 coin battery, which is readily available online or at most electronic stores. By following these instructions, you can save time and money by doing it yourself.

Tools and Materials

Before we begin, gather the necessary tools and materials:

• Small flathead screwdriver
• CR2032 coin battery

Step-by-Step Instructions

Step 1: Locate the Key Fob Battery Compartment

The battery compartment is located on the back of the key fob. The key fob is designed with a rounded edge and is cut in half, making it easier to pry open.

Step 2: Pry Open the Key Fob

Using a small flathead screwdriver, carefully insert it into the seam where the two halves of the key fob meet. Slowly work the edges around the key fob, prying it apart. Start at the top of the key fob for easier access.

Step 3: Remove the Top Cover

Once you have pried the key fob apart, remove the top cover. You will see the rubber casing that holds the battery in place. Gently peel away this rubber part and set it aside.

Step 4: Remove the Old Battery

The battery is now exposed. It is a CR2032 coin battery. Carefully pop the old battery out of its compartment. You can use the flathead screwdriver to help if needed.

Step 5: Insert the New Battery

Take the new CR2032 battery and insert it into the compartment with the text facing up. Ensure it fits snugly in place.

Step 6: Reassemble the Key Fob

Replace the rubber casing over the battery, making sure it lines up correctly. Then, place the top cover back onto the key fob. Work your way around the edges to ensure it is securely sealed.

Testing the Key Fob

After reassembling the key fob, test the buttons to make sure they are functioning properly. If the key fob is not working, double-check that the battery is installed correctly and that the key fob is securely closed.

Conclusion

Replacing the key fob battery for your 2009-2014 Ford F-150 is a straightforward process. With a small flathead screwdriver and a new CR2032 battery, you can have your key fob working like new in just a few minutes.

By following these steps, you can avoid the hassle and expense of taking your key fob to a professional for battery replacement. Keep a spare CR2032 battery on hand for future replacements, and you’ll always be prepared.

Frequently Asked Questions

What type of battery does the Ford F-150 key fob use?

The Ford F-150 key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online or at most electronic stores.

How often should I replace the key fob battery?

It is recommended to replace the key fob battery every 1-2 years, depending on usage.

Can I use a different type of battery?

No, it is important to use the specified CR2032 battery to ensure proper functionality.

What should I do if my key fob is not working after replacing the battery?

Double-check that the battery is installed correctly and that the key fob is securely closed. If it still does not work, the key fob may need to be reprogrammed or replaced.