How to Replace the Key Fob Battery in a 2004-2006 Scion xB

Introduction

Replacing the battery in your Scion xB key fob is an essential maintenance task that ensures you can always access your vehicle. This guide will walk you through the steps to change the battery in the key fob for the first-generation Scion xB models from 2004 to 2006.

Sale
Energizer 2016 Batteries (2 Pack), 3V Lithium Coin Batteries With 3-in-1 Child Shield
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Required Tools and Materials

Before you start, make sure you have the following items:

  • CR2016 coin battery
  • Small flathead screwdriver

Identifying the Battery Type

The first thing you need to know is the type of battery your key fob uses. The Scion xB key fob requires a CR2016 coin battery.

Locating the Notch

On the top of the key fob, you’ll find a small notch. This notch is crucial for opening the key fob. Use a small flathead screwdriver to pry open the key fob at this point.

Prying Open the Key Fob

Insert the flathead screwdriver into the notch and gently work it to pry the key fob apart. This step can be a bit tricky, especially if you’re doing it for the first time. Keep working the notch until you can get some leverage and start opening the key fob.

Separating the Key Fob Halves

Once you have a bit of leverage, continue to work your way around the edges of the key fob to separate the two halves. Be patient, as it can be tight the first time you do this.

Accessing the Battery

After successfully prying the key fob apart, you’ll gain access to the battery compartment. The battery is a CR2016 coin battery. You’ll notice two brass tongs holding the battery in place.

Removing the Old Battery

Use the small flathead screwdriver to pop the old battery out of its slot. Be careful not to damage the brass tongs or any other components inside the key fob.

Inserting the New Battery

Take your new CR2016 coin battery and place it in the slot with the positive side facing up. Ensure that the battery fits snugly into place and that it makes contact with the brass tongs.

Reassembling the Key Fob

Once the new battery is securely in place, align the two halves of the key fob and press them together until they snap back into place. Make sure the key fob is securely closed to prevent any water or dirt from getting inside.

Testing the Key Fob

After reassembling the key fob, test it to make sure the new battery is working correctly. Press the buttons to ensure that the key fob is sending signals to your vehicle.

Sale
Energizer 2016 Batteries (2 Pack), 3V Lithium Coin Batteries With 3-in-1 Child Shield
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Conclusion

Replacing the battery in your Scion xB key fob is a simple task that can save you time and money. By following these steps, you can easily change the battery and ensure that your key fob remains functional.

FAQs

What type of battery does the Scion xB key fob use?

The Scion xB key fob uses a CR2016 coin battery.

Is it difficult to open the key fob?

Opening the key fob can be tricky the first time, but with patience and the right tools, it becomes easier.

Do I need any special tools?

You only need a small flathead screwdriver to open the key fob and replace the battery.

How often should I replace the key fob battery?

Replace the battery when you notice a decrease in the key fob’s range or if it stops working altogether.

Can I use a different type of battery?

No, you should only use a CR2016 coin battery to ensure proper functionality.

What should I do if the key fob still doesn’t work after replacing the battery?

Double-check that the battery is installed correctly. If it still doesn’t work, you may need a new key fob.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward if you follow the steps carefully.

Where can I buy a CR2016 battery?

You can purchase a CR2016 battery from most electronics stores or online retailers like Amazon.

Sale
Energizer 2016 Batteries (2 Pack), 3V Lithium Coin Batteries With 3-in-1 Child Shield
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.