Introduction
Owning a Ford Five Hundred from 2007 or 2008 means you’ll eventually need to replace the key fob battery. It’s a simple process that anyone can do with minimal tools. In this guide, I’ll walk you through the steps to change the key fob battery efficiently.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before diving into the replacement process, gather the necessary tools and materials. This ensures a smooth and quick battery replacement.
- Flathead screwdriver
- CR2032 coin battery
Step-by-Step Guide to Replacing the Battery
Follow these steps to replace your key fob battery.
Locate the Notch
The first step is to find the notch on your key fob. This is usually located at the upper right corner. The notch allows for the separation of the two halves of the key fob.
Separate the Key Fob Halves
Once you locate the notch, insert a flathead screwdriver or another key into it. Apply gentle pressure and twist to create leverage. This will help in separating the two halves of the key fob.
Access the Internal Battery
After separating the key fob, you will see a rubber mat covering the battery. Carefully lift this mat to access the battery underneath.
Remove the Old Battery
Using the flathead screwdriver, gently pry out the old CR2032 battery. Be mindful of the orientation of the battery for the next step.
Insert the New Battery
Take the new CR2032 battery and place it in the slot with the positive side facing up. Ensure the battery is seated properly to avoid any connection issues.
Reassemble the Key Fob
Once the new battery is in place, put the rubber mat back over it. Align the two halves of the key fob and snap them back together. Ensure everything is securely in place before testing the key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Testing the New Battery
After reassembling the key fob, test it to ensure the new battery is working correctly. Try locking and unlocking your car from a distance. If everything functions as expected, you have successfully replaced the key fob battery.
Common Issues and Troubleshooting
Sometimes, even after replacing the battery, the key fob might not work. Here are some common issues and their solutions.
Improper Battery Orientation
Ensure the battery is inserted with the positive side facing up. An incorrectly placed battery will not power the key fob.
Loose Battery Connection
Check if the battery is seated properly. A loose connection can prevent the key fob from working.
Faulty Key Fob
If the key fob still doesn’t work, there might be an issue with the fob itself. In this case, you may need a replacement key fob.
FAQ
What type of battery does the Ford Five Hundred key fob use?
The Ford Five Hundred key fob uses a CR2032 coin battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
Typically, key fob batteries last 3-4 years. Replace the battery when you notice a decrease in range or if the fob stops working.
Can I use any CR2032 battery?
Yes, any CR2032 battery will work. However, it’s best to purchase from a reputable brand to ensure quality and longevity.
Do I need to reprogram the key fob after replacing the battery?
No, replacing the battery does not require reprogramming the key fob. It should work immediately after the battery is replaced.
What should I do if the key fob still doesn’t work after replacing the battery?
Double-check the battery orientation and connection. If it still doesn’t work, the key fob might be faulty and may need to be replaced.
Conclusion
Replacing the key fob battery in your 2007-2008 Ford Five Hundred is a simple task. With a few tools and a new CR2032 battery, you can have your key fob working like new in no time. Follow this guide to ensure a smooth and successful battery replacement.