How to Replace the Key Fob Battery in a 2013-2019 Ford Escape

Introduction

Replacing the battery in your Ford Escape key fob is a straightforward process. The Ford Escape models from 2013 to 2019 use a smart key fob that lacks a physical key. It only has lock and unlock buttons. In this guide, I will show you how to change the battery in your key fob.

Tools and Materials Needed

To replace the battery in your Ford Escape key fob, you will need a CR2032 coin battery. These batteries are commonly available and can be purchased online or at most stores.

• CR2032 coin battery
• Small flat-head screwdriver or paperclip

Step-by-Step Guide

Follow these steps to replace the battery in your Ford Escape key fob:

Step 1: Locate the Latch

Flip the key fob over to the back. You will notice a button that acts as a latch. This button is crucial for opening the fob.

Step 2: Depress the Button

Press the button down to release the internal latch. This action will allow you to separate the back part of the fob from the main part.

Step 3: Separate the Back

While holding the button down, use your finger or a small tool to get some leverage between the back and the main part of the fob. This will make it easier to remove the back cover.

Step 4: Remove the Coin Battery

With the back cover removed, you will see the CR2032 coin battery. Use a small flat-head screwdriver or a paperclip to pop the battery out of its compartment.

Step 5: Insert the New Battery

Take the new CR2032 battery and ensure that the positive side (the side with the lettering) is facing down. Align it with the two metal prongs in the battery compartment and press it into place.

Step 6: Reassemble the Key Fob

Once the new battery is in place, put the back cover back onto the main part of the fob. Press it until it clicks into place, ensuring that the latch resets properly.

Tips and Tricks

Here are some additional tips to make the battery replacement process even easier:

• Use a small tool for leverage
• Ensure the positive side is down
• Check the latch after reassembly

FAQ

What type of battery does the key fob use?

The Ford Escape key fob uses a CR2032 coin battery.

How often should I replace the battery?

Typically, the battery should be replaced every 2-3 years, depending on usage.

Can I use a different type of battery?

No, it is recommended to use a CR2032 coin battery for optimal performance.

What should I do if the key fob doesn’t work after replacing the battery?

Ensure the battery is installed correctly and the latch is properly reset. If it still doesn’t work, you may need to consult a professional.

Conclusion

Replacing the battery in your Ford Escape key fob is a simple task that can be done in just a few minutes. By following these steps, you can ensure that your key fob continues to work properly. Always use a CR2032 coin battery and make sure the positive side is facing down when inserting the new battery.

Thank you for reading this guide. I hope it has been helpful in assisting you with your key fob battery replacement.