Introduction
Replacing the key fob battery in your Ford Fusion is a simple process. This guide will walk you through the steps needed to change the battery in the flip key version of the Ford Fusion key fob for model years 2013 to 2017.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Identify Your Key Fob
The first step in replacing your key fob battery is to ensure you have the correct type of key fob. The Ford Fusion from 2013 to 2017 uses a flip key fob. If your key fob matches this description, you are ready to proceed with the battery replacement.
Gather Necessary Tools
Before you begin, gather the tools you will need:
- Flathead screwdriver
- CR2032 coin battery
These tools will help you open the key fob and replace the battery efficiently.
Flip Out the Key
Start by flipping out the key from the key fob. This will give you better access to the area where you need to work.
Locate the Indentation
Next, locate the small indentation at the base of the key fob. This indentation is where you will insert your flathead screwdriver to pry off the backing of the key fob.
Pry Off the Backing
Insert the flathead screwdriver into the indentation and gently pry off the backing of the key fob. Be careful not to apply too much force to avoid damaging the key fob.
Remove the Old Battery
Once the backing is off, you will see the old CR2032 coin battery. Carefully pop the old battery out of its slot. It might fly off, so be prepared to catch it.
Install the New Battery
Take your new CR2032 coin battery and ensure that the lettering is facing towards you. This indicates the positive side. Insert the new battery into the slot, making sure it is securely in place.
Reattach the Backing
With the new battery installed, align the backing with the key fob and press it back into place. Ensure that it snaps securely to avoid any loose parts.
Test the Key Fob
After reassembling the key fob, test it to ensure that the new battery is working correctly. Try locking and unlocking your car to verify functionality.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the key fob battery in your Ford Fusion is a quick and easy process. With just a few tools and a new CR2032 coin battery, you can have your key fob working like new in no time.
FAQ
What type of battery does the Ford Fusion key fob use?
The Ford Fusion key fob uses a CR2032 coin battery.
How often should I replace my key fob battery?
It is recommended to replace the key fob battery every 1-2 years or when you notice a decrease in functionality.
Can I use any other type of battery?
No, it is important to use a CR2032 coin battery to ensure compatibility and proper functionality.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, double-check the battery orientation and ensure it is properly installed. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to consult a professional.
Is it safe to replace the key fob battery myself?
Yes, replacing the key fob battery is a safe and simple process that can be done at home with minimal tools.
Do I need to reprogram my key fob after replacing the battery?
No, you do not need to reprogram your key fob after replacing the battery. It should work immediately after the new battery is installed.
What if my key fob has a different design?
If your key fob has a different design, consult your vehicle’s manual or a professional for specific instructions on how to replace the battery.
Where can I buy a CR2032 coin battery?
CR2032 coin batteries are widely available at most electronics stores, supermarkets, and online retailers.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032