How to Replace the Key Fob Battery in a Subaru Legacy (2006 – 2007)

Introduction

Replacing the key fob battery for your Subaru Legacy is a simple task that you can easily do at home. In this guide, I will walk you through the steps required to change the battery in your key fob. All you need is a CR2025 coin battery and a flathead screwdriver. Let’s get started!

Sale
Energizer Battery, 3V Lithium Coin Cell Batteries, Packaging May Vary, Black, 2 Count
  • 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
  • Performs in extreme temperatures from -22 F to 140 F
  • Long-lasting choice for calculators, scales and remote batteries

Tools and Materials Needed

Before you begin, gather the necessary tools and materials. Here’s what you’ll need:

  • CR2025 coin battery
  • Flathead screwdriver

If you don’t already have a CR2025 battery, you can purchase one from Amazon.

Step-by-Step Instructions

Step 1: Open the Key Fob

First, you need to open the key fob. Hold the key fob and locate the indentation along the seam of the plastic. This is where you will insert your flathead screwdriver.

Insert the screwdriver gently into the indentation. Be careful not to apply too much pressure. Twist the screwdriver to separate the two halves of the key fob. It should come apart easily.

Step 2: Remove the Old Battery

Once the key fob is open, locate the battery. Use the same flathead screwdriver to remove the old battery. There is a small opening in the plastic near the top left corner of the battery compartment.

Insert the corner of the screwdriver into this opening and gently lift the battery out. The old battery should pop out without much effort.

Step 3: Insert the New Battery

Now, take your new CR2025 battery. Make sure the positive side (the side with the text) is facing down. Place the battery into the compartment and press it down until it clicks into place.

Ensure that the battery is securely in position before proceeding to the next step.

Step 4: Reassemble the Key Fob

With the new battery in place, you can now reassemble the key fob. Align the two halves of the key fob and press them together until they click into place.

Make sure that the key fob is securely closed and that there are no gaps along the seam.

Sale
Energizer Battery, 3V Lithium Coin Cell Batteries, Packaging May Vary, Black, 2 Count
  • 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
  • Performs in extreme temperatures from -22 F to 140 F
  • Long-lasting choice for calculators, scales and remote batteries

Testing the Key Fob

After replacing the battery and reassembling the key fob, it’s important to test it to ensure it’s working properly. Stand near your Subaru Legacy and press any button on the key fob. The car should respond by locking or unlocking the doors.

If the key fob doesn’t work, double-check that the battery is installed correctly and that the key fob is assembled properly. If it still doesn’t work, you may need to try a different battery or consult a professional for further assistance.

FAQs

What type of battery does the Subaru Legacy key fob use?

The Subaru Legacy key fob uses a CR2025 coin battery.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver to open the key fob and remove the old battery.

How often should I replace the key fob battery?

It’s recommended to replace the key fob battery every 1-2 years, or as soon as you notice the key fob’s range diminishing.

Can I use a different type of battery?

No, you should only use a CR2025 battery to ensure compatibility and proper function of the key fob.

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, double-check the battery’s orientation and ensure the key fob is properly assembled. If the problem persists, try a different battery or consult a professional.

Where can I buy a replacement battery?

You can purchase a replacement CR2025 battery from Amazon or any local electronics store.

Sale
Energizer Battery, 3V Lithium Coin Cell Batteries, Packaging May Vary, Black, 2 Count
  • 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
  • Performs in extreme temperatures from -22 F to 140 F
  • Long-lasting choice for calculators, scales and remote batteries

Conclusion

Replacing the battery in your Subaru Legacy key fob is a quick and easy process. With just a CR2025 battery and a flathead screwdriver, you can have your key fob working like new in no time. If you found this guide helpful, feel free to share it with others who might benefit from it.

For more information on key fob battery replacements for other makes and models, visit fobbattery.com.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.