Introduction
Replacing the battery in your Chevrolet Impala key fob is a simple task that can be done at home in under five minutes. This guide will walk you through the steps needed to replace the battery, ensuring your key fob functions properly. Let’s get started!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, gather the following tools and materials:
- CR2032 battery
- Coin (e.g., a quarter)
If you don’t have a CR2032 battery, you can easily purchase one online. Check out this Amazon link for a quick purchase.
Step-by-Step Instructions
Follow these steps to replace the battery in your Chevrolet Impala key fob:
Step 1: Open the Key Fob
The first step is to open the key fob. Start by flipping out the key. This will expose the area where you need to push to remove the back section of plastic.
Step 2: Remove the Back Section
Next, locate the lip where the key was housed. Push on this lip to remove the back section of plastic. You can do this by hand or use a coin if it’s a bit stuck. Hold the top of the key fob, insert the coin, and twist to help push off the back piece of plastic.
Step 3: Remove the Old Battery
With the back section removed, you’ll see the battery. Find the side of the battery that has a small tab holding it in place. Push down on this tab, and the battery will pop out. Dispose of the old battery properly.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Slide it under the tab and push the other side down until it sits flat.
Step 5: Reassemble the Key Fob
Finally, line up the back section of plastic and click it back into place. Fold the key back in, and you’re done! Your key fob should now be working with the new battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Different Versions of the Key Fob
There are multiple versions of the Chevrolet Impala key fob, including three-button, four-button, and five-button models. The process for replacing the battery is the same for all versions. The CR2032 battery is compatible with each of these models.
Troubleshooting Common Issues
If you encounter any issues while replacing the battery, here are some common problems and solutions:
- Back piece won’t come off: Use a coin to twist and push it off.
- Battery doesn’t sit flat: Ensure the positive side is facing up.
- Key fob not working after replacement: Double-check the battery orientation.
Why Replace the Battery?
Replacing the battery in your key fob is essential for maintaining its functionality. A dead battery can prevent you from unlocking your car remotely, which can be inconvenient. Regularly replacing the battery ensures your key fob works when you need it most.
Where to Buy Replacement Batteries
It’s easy to find CR2032 batteries online. You can purchase them from various retailers, including Amazon. Buying online can save you time and ensure you get the correct battery for your key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Additional Resources
If you need more information or assistance with other key fobs, check out FobBattery. They offer guides and videos for almost every make and model, ensuring you have the resources you need to keep your key fob working.
FAQs
What type of battery does the Chevrolet Impala key fob use?
The Chevrolet Impala key fob uses a CR2032 battery.
How long does it take to replace the battery?
Replacing the battery takes less than five minutes.
Do I need any special tools?
No special tools are needed. A coin and the new battery are all you need.
Can I use a different type of battery?
No, it’s recommended to use a CR2032 battery for compatibility.
What should I do if the key fob doesn’t work after replacing the battery?
Double-check the battery orientation and ensure it’s seated properly.
Replacing the battery in your Chevrolet Impala key fob is a quick and easy task. By following these steps, you can ensure your key fob remains functional and reliable. If you have any questions or need further assistance, feel free to explore additional resources or reach out for help.