Hyundai Veloster 2019 Keyless Entry Flip Key Fob Battery Replacement Guide

Introduction

Welcome! Today, I will guide you through replacing the battery in your Hyundai Veloster 2019 keyless entry flip key fob. This process is straightforward and only requires a few tools and a new battery. Let’s dive into the steps to ensure your key fob functions perfectly again.

Tools and Materials Needed

Before we begin, gather the following items:

• CR2032 Coin Battery
• Small flat-head screwdriver
• Precision screwdriver set

Having these tools ready will make the process smoother and quicker.

Step-by-Step Battery Replacement

Step 1: Flip Out the Key

First, flip out the key from your key fob. This will give you better access to the areas you need to work on.

Step 2: Locate the Indentations

Next, identify the two small indentations on the back of the key fob. These are the spots where you will insert your flat-head screwdriver.

Step 3: Pry Open the Back Cover

Carefully insert the flat-head screwdriver into one of the indentations. Apply gentle pressure to create leverage and pop the back cover off. Repeat this process on the other indentation to fully remove the back cover.

Step 4: Remove the Phillips Screws

With the back cover off, you will see two small Phillips screws. Use your precision screwdriver to unscrew these. Keep these screws safe as you will need them later.

Step 5: Access the Battery

Once the screws are removed, you can access the CR2032 battery. Notice the battery is held in place by two long prongs and two shorter prongs.

Step 6: Remove the Old Battery

Gently pull the battery towards you, releasing it from the shorter prongs. The battery should pop out easily.

Step 7: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing you. Place the battery towards the long prongs first, then press it down to secure it in place.

Step 8: Reassemble the Key Fob

Replace the battery backing and reinsert the screws. Make sure they are tightened securely. Finally, snap the back cover of the key fob into place.

Congratulations! You have successfully replaced the battery in your Hyundai Veloster 2019 keyless entry flip key fob.

Tips and Precautions

• Handle the battery carefully.
• Ensure the positive side is facing you.
• Keep screws in a safe place.
• Do not force the cover back on.

Following these tips will help you avoid any issues during the replacement process.

FAQ

What type of battery do I need?

You need a CR2032 coin battery for the Hyundai Veloster 2019 key fob.

Do I need any special tools?

A small flat-head screwdriver and a precision screwdriver set are required.

How long does the replacement process take?

The entire process should take about 10 minutes.

Is it necessary to reprogram the key fob after replacing the battery?

No, you do not need to reprogram the key fob after replacing the battery.

Where can I buy the battery?

You can purchase the CR2032 battery on Amazon or at most electronics stores.

Conclusion

Replacing the battery in your Hyundai Veloster 2019 keyless entry flip key fob is a simple and quick task. By following the steps outlined in this guide, you can ensure your key fob remains functional and reliable. Always keep a spare CR2032 battery on hand for future replacements. Happy driving!