Hyundai Veloster Key Fob Battery Replacement (2019 – Present)

Introduction

Changing the battery in your Hyundai Veloster key fob is a straightforward task. This guide will walk you through the process step-by-step. The key fob used between 2019 and 2020 requires a CR2032 battery. You can easily replace it yourself at home with minimal tools.

Tools and Materials Needed

• CR2032 battery
• Flathead screwdriver

Step-by-Step Guide

Step 1: Obtain a New Battery

First, you need to get a CR2032 battery. These batteries are available on Amazon for a few dollars. If you’d like to purchase one, you can find a link in the description.

Step 2: Remove the Internal Key

Flip your key fob over to the back. You’ll see a small lever. Push this lever to remove the internal key. Set the key aside for now.

Step 3: Open the Key Fob

After removing the internal key, you’ll notice a hole where the key was. Below this hole, there is a small slot. Insert your flathead screwdriver into this slot.

With the back of the key fob facing up, gently twist the screwdriver. The two halves of the key fob will start to come apart. To be safe, continue twisting gently and work your way down the edges until the halves are fully separated.

Step 4: Remove the Old Battery

Once the key fob is open, you’ll see the CR2032 battery. Carefully push on the bottom of the battery with your finger or the screwdriver. Be cautious not to scratch or damage any components.

Step 5: Insert the New Battery

Take your new CR2032 battery and ensure the positive side (with the battery information) is facing up. Slide the battery back into place, pressing it down until it locks securely.

Step 6: Reassemble the Key Fob

Align the two halves of the key fob and press them back together until you hear a click. Make sure everything is lined up correctly.

Step 7: Reinsert the Internal Key

Return the internal key to its original position. You should see a light come on, indicating that the battery has been successfully replaced and has power.

Conclusion

Replacing the battery in your Hyundai Veloster key fob is a simple and quick process. By following these steps, you can save time and money by doing it yourself. If you found this guide helpful, feel free to leave a like. For more detailed information, you can visit the link in the description to see the complete guide on fobbattery.com.

FAQ

What type of battery does the Hyundai Veloster key fob use?

The Hyundai Veloster key fob uses a CR2032 battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon. They are inexpensive and readily available.

Do I need any special tools to replace the battery?

You only need a flathead screwdriver to open the key fob and replace the battery.

How do I know if the battery replacement was successful?

After reassembling the key fob and inserting the internal key, a light should come on, indicating that the battery has power.

Can I damage the key fob while replacing the battery?

As long as you are careful and follow the steps, you should not damage the key fob. Be gentle when using the screwdriver and avoid scratching any components.

How often should I replace the key fob battery?

Typically, the battery should be replaced every 1-2 years, depending on usage. If you notice a decrease in range or responsiveness, it may be time to replace the battery.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or following local disposal regulations for batteries.

Is it necessary to reprogram the key fob after replacing the battery?

No, replacing the battery does not require reprogramming the key fob. It should function normally once the new battery is installed.