Introduction
Replacing the battery in your Jeep Liberty key fob is a simple and cost-effective task you can do at home. This guide will walk you through the process step-by-step. For those driving a 2002, 2003, or 2004 Jeep Liberty, this guide is specifically for you. Let’s get started!
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
What You’ll Need
Before diving into the battery replacement process, gather the necessary tools and materials. Fortunately, you won’t need much.
- Two CR2016 Coin Batteries
- Flathead Screwdriver
You can purchase the CR2016 batteries from Amazon for a few dollars. Having the right tools on hand will make the process smooth and straightforward.
Steps to Replace the Battery
Follow these steps to replace the battery in your Jeep Liberty key fob:
Step 1: Locate the Slot
First, find the small slot on the side of your key fob. This is where you will insert the flathead screwdriver to open the fob.
Step 2: Open the Key Fob
Insert the flathead screwdriver into the slot. Hold the key fob firmly and gently twist the screwdriver. This should start to open the fob. You can either pull it apart with your fingers or continue to twist the screwdriver until it opens completely.
Step 3: Remove the Old Batteries
Inside the key fob, you’ll find two CR2016 batteries stacked on top of each other. Carefully remove the first battery using your fingernail or the flathead screwdriver. For the second battery, push down on one side to make it pop up, then lift it out with your fingernail or the screwdriver.
Step 4: Insert New Batteries
Take your new CR2016 batteries and ensure the positive side is facing up. Place the first battery into the slot, followed by the second battery on top of the first, both with the positive side up.
Step 5: Close the Key Fob
Once the new batteries are in place, click the two halves of the key fob back together. Make sure it is securely closed.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Additional Tips
Here are a few additional tips to make the process even smoother:
- Work on a clean, flat surface to avoid losing any small parts.
- If the key fob doesn’t open easily, don’t force it. Gently twist the screwdriver until it comes apart.
- Dispose of the old batteries properly, as they can be harmful to the environment.
Benefits of DIY Key Fob Battery Replacement
Replacing the key fob battery yourself has several benefits:
- Cost Savings: Avoid labor charges.
- Convenience: No need to visit a dealership.
- Quick Process: Takes only a few minutes.
By handling this simple task yourself, you can save both time and money.
Conclusion
Changing the battery in your Jeep Liberty key fob is a straightforward process that can be done in just a few minutes. By following the steps outlined in this guide, you’ll have your key fob working like new in no time. Remember, you can purchase the necessary CR2016 batteries from Amazon.
If you found this guide helpful, please leave a comment or like. For more information on key fob battery replacements for various makes and models, visit fobbattery.com.
FAQ
Can I use a different type of battery?
No, it is essential to use CR2016 batteries, as they are designed to fit the key fob correctly.
How often should I replace the key fob battery?
The battery typically lasts 1-2 years, but it depends on usage. Replace it when you notice a decrease in range or response time.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide.
What if my key fob still doesn’t work after replacing the battery?
If the key fob doesn’t work after replacing the battery, ensure the batteries are installed correctly. If it still doesn’t work, there may be an issue with the key fob itself.
Where can I buy CR2016 batteries?
You can purchase CR2016 batteries from Amazon or other online retailers.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power