Jeep Renegade Key Fob Battery Replacement (2015 – 2021)

Introduction

Replacing the battery in your Jeep Renegade key fob is a simple task that you can do at home. This guide will walk you through the steps needed to replace the battery in key fobs used from 2015 to 2021.

You will need a CR2032 coin battery, which you can easily purchase online. I have provided a link to buy the battery on Amazon for your convenience.

Tools and Materials Needed

The good news is that you don’t need many tools to replace the battery. Here’s what you’ll need:

• CR2032 coin battery
• Flathead screwdriver or a coin

Step-by-Step Instructions

Step 1: Remove the Internal Key

First, flip over the key fob. You will see a small lever or button. Press this button to release and remove the internal key. This will expose the keyhole and a small slot that we will use to open the key fob.

Step 2: Open the Key Fob

Insert a flathead screwdriver, coin, or any tool that fits into the slot. Gently twist with very little force. The key fob will start to open up. Work your way down the seam, carefully twisting until the two halves of the key fob come apart.

Step 3: Remove the Old Battery

Once the key fob is open, you will see the old CR2032 battery. Use the same tool to gently pry the old battery out from under its metal housing. The battery should pop out easily.

Step 4: Insert the New Battery

Take your new CR2032 battery and make sure the positive side is facing down. Position it first by pushing it towards the metal component. Once it is aligned, click the other side down into place.

Step 5: Reassemble the Key Fob

Click the two halves of the key fob back together. Ensure that all parts align correctly. You may need to apply a little pressure to make sure everything snaps back into place. Finally, reinsert the internal key.

Conclusion

And that’s it! You have successfully replaced the battery in your Jeep Renegade key fob. This simple task can save you time and money. If you found this guide helpful, feel free to leave a like or comment.

For more information on changing batteries for key fobs of nearly every make and model, visit fobbattery.com. Thank you for reading!

FAQ

What type of battery does the Jeep Renegade key fob use?

The Jeep Renegade key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can easily purchase a CR2032 battery online or at most hardware stores. A link to buy it on Amazon is also provided in this guide.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver or a coin to open the key fob.

How often should I replace the battery in my key fob?

It’s a good idea to replace the battery every 1-2 years or when you notice the key fob isn’t working as well as it used to.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide.

What should I do if the key fob doesn’t work after replacing the battery?

If the key fob doesn’t work after replacing the battery, make sure the battery is installed correctly with the positive side down. If it still doesn’t work, you might need a new key fob.

Can I use any CR2032 battery?

Yes, any CR2032 battery should work, but it’s always best to use a reputable brand for reliability.

Is there a warranty on the key fob battery?

Batteries typically don’t come with a warranty, but some sellers might offer a short return period.