Introduction to Key Duplication for Jeep Wranglers
Duplicating a key for your Jeep Wrangler has never been easier. With the Simple Key Kit, you can do it yourself at home without the need to visit a dealer. This guide will walk you through the entire process step-by-step, ensuring that you can program a new key fob quickly and efficiently.
This method works for several Jeep models, including the Compass, Grand Cherokee, Liberty, Patriot, and Wrangler, for the years specified on the kit. Before we dive into the process, let’s take a look at what’s included in the Simple Key Kit and some important initial checks.
- Battery Model: VL2020
- Please compare the leg position carefully,this battery is 90 degrees leg
- it is a Rechargeable battery
Unboxing the Simple Key Kit
When you open the Simple Key Kit, you will find three main components: the user guide, the easy installer, and a new key fob. It’s important to note that you will need to get the physical key cut before starting the pairing process. Additionally, ensure that the easy installer is in good condition, with no damaged or missing plastic tags.
If the plastic tag on the plug part of the easy installer is damaged or says “void,” the kit will not work, and you should return it for a new one. Also, make sure you have your current working key with you, as it is essential for the activation process.
Activating Your New Key
To activate your new key, you need to find the activation code for your current key fob and model. Match the key fob to your key fob and write down the corresponding number. If you have a three-button key fob for specific Jeep models, check the FCC ID on your old key fob and use the activation code 233 if it matches.
Once you have the activation code, follow these steps:
- Press lock and panic simultaneously.
- The light will turn on, indicating readiness.
- Enter the activation code using the buttons (e.g., for code 231, press lock twice, panic three times, and unlock once).
- Press lock and panic once more.
If the light blinks back the code correctly, your key is activated. If not, repeat the process until the correct code is entered.
Pairing the New Key with Your Jeep
Now that your new key is activated, it’s time to pair it with your Jeep. Gather your easy installer, new key, and old key, and follow these steps:
Locate the OBD Port
The OBD port is usually located under the dashboard near the pedals. If you can’t find it, refer to your vehicle’s owner’s manual.
Prepare Your Vehicle
- Get inside your car and close all doors.
- Ensure the vehicle is off and in park.
- Turn on the hazard lights.
Set the Dial Position
For most Jeep models, set the dial position on the easy installer to 1. For the Grand Cherokee, start with position 1, and if it doesn’t work, try position 2.
Start the Engine
- Use the old key to start the engine.
- Remove the seal from the easy installer and plug it into the OBD port.
Wait up to eight seconds for three quick beeps. If you hear a different sound, refer to the error section below.
Insert the New Key
- Turn off the vehicle and remove the old key.
- Insert the new key into the ignition and turn it to the “on” or “run” position (do not start the engine).
- Press the button on the bottom of the easy installer once.
Wait for three quick beeps. If successful, turn off the vehicle, remove the key, and press the button once more to hear a chime. This indicates that the pairing process is complete. Test both the new and old keys to ensure they work.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Common Errors and Troubleshooting
Here are some common errors you might encounter during the pairing process and how to resolve them:
- If the easy installer beeps eight times, it means eight keys have already been paired to your vehicle, and you cannot pair more. Contact technical support for assistance.
- If the easy installer sounds two or three beeps at one-second intervals three times, it indicates the easy installer has been used on another vehicle, and you need a new kit.
- If the new key won’t pair, check the dial position. For Grand Cherokee, try position 2 if position 1 doesn’t work.
- If the vehicle won’t start with the new or old key, contact customer support for further assistance.
Frequently Asked Questions (FAQ)
Can I use the same easy installer on other vehicles?
No, once the easy installer is used to pair a key, it is linked to that specific vehicle and cannot be used on others.
What if the easy installer was unplugged during the pairing process?
If the easy installer is unplugged during pairing, start the process over from the beginning by unplugging the device, removing any keys, and turning off the engine.
How do I pair additional keys?
You can pair up to eight keys with the easy installer. To pair additional keys, activate the new key and follow the same pairing process, ensuring to reset everything between each pairing.
What should I do if the vehicle won’t start with the new or old key after pairing?
If the vehicle does not start with either key after attempting to pair, contact customer support for assistance.
- IN THE BOX: 4-pack of CR1632 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures
Conclusion
By following these steps, you can easily duplicate and program a new key for your Jeep Wrangler using the Simple Key Kit. This DIY method saves you time and money compared to visiting a dealership. If you encounter any issues, refer to the troubleshooting section or contact technical support for help. Enjoy the convenience of having a spare key, and happy driving!