Introduction
Replacing the battery in your Kia Forte key fob is a straightforward process. This guide will walk you through each step to ensure your key fob is up and running in no time. The models covered include 2014 through 2018.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you start, make sure you have the following tools and materials:
- Flathead screwdriver
- CR2032 coin battery
You can purchase the CR2032 battery from Amazon.
Step-by-Step Guide
Follow these steps to replace the battery in your Kia Forte key fob:
Step 1: Remove the Internal Key
First, locate the button on the back of the key fob. Push this button to release the internal key. Remove the key and set it aside.
Step 2: Locate the Keyhole Slot
With the internal key removed, find the keyhole on the key fob. Opposite the keyhole, you’ll see a small slot. This slot is designed for opening the key fob.
Step 3: Open the Key Fob
Insert a flathead screwdriver into the slot. Twist the screwdriver to separate the two halves of the key fob. Be careful not to damage the circuit board inside.
Step 4: Remove the Old Battery
Using the flathead screwdriver, gently pry the old CR2032 battery out from its compartment. Approach the battery from beneath and lift it out carefully.
Step 5: Insert the New Battery
Take the new CR2032 battery and ensure the positive side (the side with the text) is facing down. Click the battery into place.
Step 6: Reassemble the Key Fob
Carefully align the two halves of the key fob and press them together until they click back into place. Make sure the internal circuit board is correctly positioned.
Step 7: Replace the Internal Key
Insert the internal key back into its slot. Ensure it is securely in place.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Testing Your Key Fob
After replacing the battery, test your key fob to make sure it’s working properly. If it isn’t functioning as expected, double-check the battery placement and ensure the key fob is properly reassembled.
FAQs
What type of battery does the Kia Forte key fob use?
The Kia Forte key fob uses a CR2032 coin battery.
How often should I replace the key fob battery?
Typically, the battery should be replaced every 1-2 years, depending on usage.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob is not working after replacing the battery, check the battery placement and ensure the key fob is properly assembled. If it still doesn’t work, the issue may be with the key fob itself.
Can I use a different type of battery?
No, you should only use a CR2032 coin battery to ensure compatibility and proper function.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Kia Forte key fob is a simple process that can be done in just a few minutes. By following these steps, you can ensure your key fob remains functional and reliable. For more information on key fob battery replacements, visit Fob Battery.