Kia Niro Key Fob Battery Replacement (2017 – 2020)

Introduction

Changing the battery in your Kia Niro key fob might seem daunting, but it’s a straightforward process. This guide will walk you through each step to ensure your key fob is up and running in no time.

Tools and Materials Needed

• CR2032 Coin Battery
• Flathead Screwdriver

Step-by-Step Guide

Step 1: Remove the Internal Key

First, flip the key fob over. Hold down the silver button to pull out the internal key. This will reveal the keyhole and a smaller indentation opposite it.

Step 2: Pry Open the Key Fob

Insert a flathead screwdriver into the smaller indentation. Twist the screwdriver to start opening the device. You can either pull it apart with your fingers or continue twisting the screwdriver along the opening until the fob comes apart.

Step 3: Remove the Old Battery

Set the top part of the key fob aside. Use the flathead screwdriver or a similar tool to pry out the old CR2032 battery. Lift it gently to avoid damaging any components.

Step 4: Insert the New Battery

Take your new CR2032 battery and place it face down into the battery slot. Press it down until it clicks into place. Ensure the battery is securely fitted.

Step 5: Reassemble the Key Fob

If the circuit board fell out during the process, match its shape to the housing and gently push it back into place. Align the two halves of the key fob and press them together until they click.

Step 6: Insert the Internal Key

Finally, insert the internal key back into its slot. Ensure it clicks into place and is secure.

Common Issues and Troubleshooting

Key Fob Not Working After Battery Replacement

If your key fob isn’t working after replacing the battery, ensure the battery is correctly installed. The positive side should be facing down. Also, check if the circuit board is properly seated in its housing.

Difficulty in Opening the Key Fob

If you find it difficult to open the key fob, ensure you’re inserting the screwdriver into the correct indentation. Applying too much force can damage the key fob, so be gentle and patient.

FAQs

What type of battery does the Kia Niro key fob use?

The Kia Niro key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

Generally, the battery should be replaced every 1-2 years, depending on usage.

Can I use a different type of battery?

No, it’s recommended to use a CR2032 battery for compatibility and optimal performance.

Do I need to reprogram the key fob after replacing the battery?

No, replacing the battery does not require you to reprogram the key fob.

What should I do if the key fob still doesn’t work?

If the key fob still doesn’t work, consider consulting a professional for further diagnosis. There might be an issue beyond the battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from most electronic stores or online retailers like Amazon.

Conclusion

Replacing the battery in your Kia Niro key fob is simple and can be done within minutes. This guide provides all the steps you need to follow to ensure your key fob is functional. Always ensure you use the correct battery type and handle the components carefully to avoid damage.

For more information on key fob battery replacements for other makes and models, check out additional resources or visit us at FobBattery.com.