Kia Sorento Key Fob Battery Replacement Guide (2014 – 2020)

Introduction

If you own a Kia Sorento from the years 2014 to 2020, you might find yourself needing to replace the battery in your key fob. Thankfully, this is a straightforward process that you can do yourself with minimal tools. In this guide, I’ll walk you through each step to ensure your key fob is back in working order quickly.

What You’ll Need

To replace the battery in your Kia Sorento key fob, you’ll need just a few simple items:

• CR2032 battery
• Flathead screwdriver

You can purchase the CR2032 battery from Amazon.com.

Step-by-Step Instructions

Follow these steps to replace the battery in your Kia Sorento key fob:

Remove the Mechanical Key

First, turn the key fob over to the back side. Locate the button on the back of the fob. Press this button down while pulling on the key to remove it. This will reveal a keyhole and an indentation opposite the keyhole.

Open the Key Fob

Next, take your flathead screwdriver and insert it into the indentation. Hold the key fob securely, but not too tightly, and twist the screwdriver. This will start to open the key fob. Once it begins to open, you can use your fingers to pull it apart completely. Be cautious as some small components might fall out.

Remove the Old Battery

Set aside the two halves of the key fob. Using the same flathead screwdriver, gently lift the old battery out from the bottom. The battery in the key fob is a CR2025, but the replacement should be a CR2032.

Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing down. Click the battery into place. It should fit snugly and securely.

Reassemble the Key Fob

Carefully place the circuit board back into the key fob. The rubber piece inside has a straight edge and a curved edge, similar to the shape of a “D.” Align these edges correctly with the corresponding parts of the key fob and gently place it back in. Once everything is lined up, click the two halves of the key fob back together.

Replace the Mechanical Key

Finally, insert the mechanical key back into the key fob. Your key fob should now be fully operational with the new battery.

Conclusion

Replacing the battery in your Kia Sorento key fob is a simple task that can save you time and money. By following these steps, you can ensure your key fob remains functional without needing to visit a dealership or a professional.

Frequently Asked Questions (FAQ)

What type of battery does my Kia Sorento key fob use?

Your Kia Sorento key fob uses a CR2032 battery.

Can I use any flathead screwdriver?

Yes, any small flathead screwdriver will work to open the key fob and replace the battery.

What should I do if my key fob doesn’t work after replacing the battery?

If the key fob doesn’t work after replacing the battery, double-check that the battery is inserted correctly with the positive side facing down. Also, ensure that all components are securely in place before reassembling the key fob.

How often should I replace the battery in my key fob?

Typically, the battery in a key fob can last several years. However, if you notice a decrease in the key fob’s range or responsiveness, it might be time to replace the battery.

Can I use a CR2025 battery instead of a CR2032?

While a CR2025 battery might fit, it is recommended to use a CR2032 battery for optimal performance.

Where can I find more guides for changing key fob batteries?

You can find more guides and videos for changing key fob batteries on fobbattery.com.

I hope this guide has been helpful. If you have any questions or need further assistance, feel free to reach out in the comments or visit fobbattery.com for more information.