Introduction
Maintaining your car’s key fob is essential for seamless access and operation. In this guide, I’ll walk you through the process of replacing the battery in a Kia Soul key fob for models from 2014 to 2019. This simple task requires a CR2032 battery and a few basic tools.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
- CR2032 battery
- Flathead screwdriver
- Optional: Coin or another key
Step-by-Step Guide
Step 1: Open the Key
First, flip open the key. This will give you access to the back of the key fob, where we need to work.
Step 2: Remove the Back Cover
Look at the back of the key fob. You will see two plastic parts. We need to remove the bottom one.
To do this, push on the lip located near where the key was. Use your thumb to push up on the lip. The back piece should come off easily.
If it’s too tight, use a flathead screwdriver, another key, or a coin. Insert it in the gap and pry the piece off. The back cover will come off with your fingers.
Step 3: Remove the Old Battery
Now that the back cover is off, you will see the CR2032 battery. Use a flathead screwdriver to remove it.
Insert the screwdriver at the bottom of the battery, between the battery and the plastic housing. Pry the battery up gently.
Repeat this step if necessary until the battery is free.
Step 4: Insert the New Battery
Take a new CR2032 battery. Ensure the positive side, which has the battery information, is facing up.
Slide the battery under the two plastic pieces. Click the bottom part of the battery into place.
Step 5: Reattach the Back Cover
Once the new battery is in place, reattach the back cover. Click it back into place. Make sure it’s secure and lined up properly.
Check the key fob to ensure everything is functioning correctly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Kia Soul key fob is a straightforward process. With just a few tools and a new CR2032 battery, you can ensure your key fob is working correctly.
Feel free to leave a comment or like if this guide was helpful. For more information on replacing batteries in various key fobs, visit us at fogbattery.com.
FAQ
How often should I replace the key fob battery?
Typically, a key fob battery lasts 1-2 years. Replace it when the key fob starts to function intermittently.
What type of battery does the Kia Soul key fob use?
The Kia Soul key fob uses a CR2032 battery.
Can I use any tool to pry open the back cover?
While a flathead screwdriver is recommended, you can also use a coin or another key.
Where can I buy a CR2032 battery?
You can buy CR2032 batteries at most electronics stores or online retailers like Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Do I need to reprogram the key fob after replacing the battery?
No, replacing the battery does not require reprogramming the key fob.
What should I do if the key fob still doesn’t work after replacing the battery?
Ensure the battery is installed correctly. If it still doesn’t work, the key fob might need further inspection.
Can I replace the key fob battery myself?
Yes, the process is simple and can be done at home with basic tools.