Introduction
Replacing the battery in your Mazda 6 Sedan key fob might seem daunting, but it’s a simple process. This guide will walk you through the steps to replace the battery in the flip key fob used between 2006 and 2013. The battery you’ll need is a CR1620 coin battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
- CR1620 coin battery
- Flathead screwdriver
- Precision screwdriver
Step-by-Step Battery Replacement
Step 1: Flip Out the Key
First, flip out the key. This will give you access to the area where you’ll need to work. The key itself acts as a lever to push up the plastic cover.
Step 2: Remove the Plastic Cover
Use a flathead screwdriver to push up the layer of plastic on the key fob. Grip the part on the left of the line, as this part is not removable. Push up from the rim to create some space.
Once you have a small gap, insert the flathead screwdriver and twist. This will separate the two parts of the key fob. Use your fingers to finish the job if needed.
Step 3: Handle the Buttons
If the front buttons come out, don’t worry. Just make sure to squeeze them back into place before reassembling the key fob.
Step 4: Locate the Battery
Inside the key fob, you’ll find the CR1620 battery. Use a precision screwdriver to remove it, as it’s hard to reach with your fingers. Precision screwdrivers can be found online for a reasonable price.
Step 5: Remove the Old Battery
Look for an arrow in the bottom right corner of the battery compartment. Insert your tool there, push down, and pull back while rocking the tool. This will release the battery.
Step 6: Insert the New Battery
Take your new CR1620 battery. Ensure the side with the brand and battery information faces down. This is the positive side.
Slide the battery up into the part with the metal. Secure the top first, then push down on the bottom to lock it in place.
Step 7: Reassemble the Key Fob
Put the other part back on the face of the key fob. Make sure everything snaps back into place securely.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Frequently Asked Questions (FAQ)
What type of battery does the Mazda 6 key fob use?
The Mazda 6 key fob uses a CR1620 coin battery.
Where can I buy a CR1620 battery?
You can purchase a CR1620 battery online or at most electronics stores. Amazon is a reliable source.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Do I need any special tools?
A flathead screwdriver and a precision screwdriver are necessary. These tools are inexpensive and can be found online.
What should I do if the buttons fall out?
If the buttons fall out, make sure to squeeze them back into place before reassembling the key fob.
How long does the replacement process take?
Replacing the battery should take about 5-10 minutes.
Can I use a different type of battery?
It’s recommended to use a CR1620 battery, as this is the specified type for the Mazda 6 key fob.
Is there a way to avoid losing the buttons?
Handle the key fob carefully and keep track of all parts during the process to avoid losing any buttons.
Conclusion
Replacing the battery in your Mazda 6 Sedan key fob is straightforward and requires minimal tools. By following these steps, you can ensure your key fob remains functional and reliable. Happy driving!
Additional Tips
Tip 1: Work in a Clean Area
Make sure to work in a clean, well-lit area. This will help you keep track of small parts and tools.
Tip 2: Use a Tray
Use a small tray to hold screws and other tiny components. This prevents them from rolling away and getting lost.
Tip 3: Test the Key Fob
After reassembling the key fob, test it to make sure it works. If it doesn’t, double-check the battery placement and connections.
Resources
For more detailed guides and resources, you can visit the website where you found this guide. They offer a variety of how-to articles and product recommendations.
Final Thoughts
Maintaining your Mazda 6 Sedan key fob by replacing its battery is a small task that can save you from bigger headaches down the road. With this guide, you’re well-equipped to handle the job yourself. Good luck!