Mitsubishi Diamante Key Fob Battery Replacement (2000 – 2004)

Introduction

As a car owner, maintaining your vehicle is crucial. One often overlooked aspect is the key fob battery. In this guide, I’ll show you how to replace the key fob battery for the Mitsubishi Diamante models from 2000 to 2004.

This process is simple and requires minimal tools. By following these steps, you can save time and avoid the hassle of a dead key fob battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before starting, gather the necessary tools and materials:

  • CR2032 coin battery
  • Small Phillips head screwdriver

If you don’t have these tools, you can find them online. Precision screwdrivers and CR2032 batteries are readily available on platforms like Amazon.

Step-by-Step Guide

Step 1: Open the Key Fob

First, flip the key fob over. Locate the small screw on the back. Use your Phillips head screwdriver to remove it. Keep the screw safe as you’ll need it later.

Once the screw is out, the key fob will open easily. You can use your fingernails or a small tool to separate the two halves. If the key ring falls out, don’t worry. We’ll reattach it later.

Step 2: Remove the Old Battery

With the key fob open, you’ll see the old CR2032 battery. Use your screwdriver or another tool to gently pry the battery out. Dispose of the old battery properly.

Step 3: Insert the New Battery

Take your new CR2032 battery and insert it into the slot. Ensure the positive side (the side with the text) is facing down. Press it firmly to make sure it’s secure.

Step 4: Reassemble the Key Fob

Now, place the key ring back onto the post if it fell out. Align the two halves of the key fob and press them together. Finally, reinsert the screw and tighten it with your screwdriver.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Testing and Final Checks

Once you’ve reassembled the key fob, it’s time to test it. Try locking and unlocking your car to ensure the new battery works properly. If everything is functioning as expected, you’re good to go.

Common Issues and Troubleshooting

Sometimes, even after replacing the battery, the key fob may not work. Here are a few troubleshooting tips:

  • Check the Battery Orientation: Make sure the battery is inserted with the positive side facing down.
  • Inspect the Contacts: Ensure the battery contacts are clean and making good contact with the terminals.
  • Secure Assembly: Confirm the key fob is properly assembled and the screw is tight.

FAQs

What type of battery does the Mitsubishi Diamante key fob use?

The Mitsubishi Diamante key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

CR2032 batteries are available online, in electronics stores, and in some supermarkets.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Do I need any special tools to replace the key fob battery?

You’ll need a small Phillips head screwdriver. Precision screwdriver sets are ideal for this task.

How often should I replace my key fob battery?

Key fob batteries typically last 2-3 years. Replace the battery when the signal weakens or stops working.

What if my key fob still doesn’t work after replacing the battery?

Check the battery orientation and contacts. Ensure the key fob is properly assembled. If it still doesn’t work, consult a professional.

Conclusion

Replacing the battery in your Mitsubishi Diamante key fob is a straightforward process. With a new CR2032 battery and a small Phillips head screwdriver, you can complete this task in minutes.

By following this guide, you can avoid the inconvenience of a dead key fob battery. For more tutorials and information, visit our website or check out our other guides.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.