Mitsubishi Eclipse Cross Key Fob Battery Replacement Guide (2018 – 2022)

Introduction to Replacing Your Key Fob Battery

Welcome to your ultimate guide on how to replace the battery in your Mitsubishi Eclipse Cross key fob. Whether you own a 2018, 2019, 2020, 2021, or 2022 model, this guide will walk you through the entire process. You only need a CR2032 coin battery and a flathead screwdriver to get started.

Gathering Your Tools and Battery

Before you begin, make sure you have the necessary tools. You will need:

• CR2032 coin battery
• Flathead screwdriver

If you don’t have a CR2032 battery at home, you can easily purchase one from Amazon. Check out this link to get your battery for just a few bucks.

Opening the Key Fob

Start by locating the slot at the bottom of your key fob. This slot is specifically designed to help you open the device. Insert your flathead screwdriver into the slot and twist gently. You will feel the two halves of the key fob snap open.

Removing the Old Battery

Once the key fob is open, use the same flathead screwdriver to gently pry the old battery out. You will see a small hole at the top corner of the battery compartment. Insert the screwdriver into this hole and lift the battery out. When the battery is lifted enough, you can use your fingers to slide it out completely.

Inserting the New Battery

Take your new CR2032 battery and make sure the positive side (the side with the battery information) is facing up. Insert the battery under the two tabs first to secure it in place. Then, snap down the other side to lock it in.

Reassembling the Key Fob

Now that the new battery is in place, it’s time to reassemble the key fob. Align the two halves and give them a firm squeeze until they snap back together. Ensure that the device is fully sealed.

Testing Your Key Fob

After reassembling, it’s important to test your key fob to ensure the battery replacement was successful. Check if the light on your key fob turns on when you press any button. If the light comes on, you’ve done everything correctly.

Conclusion

Replacing the battery in your Mitsubishi Eclipse Cross key fob is a simple task that can be done in just a few minutes. This guide provides you with step-by-step instructions to make the process straightforward and easy to follow. If you found this guide helpful, feel free to leave a comment or give us a like.

For more tutorials on key fob battery replacements for almost every make and model, visit our website FobBattery.com. We have a comprehensive database of batteries and fobs to assist you with any key fob needs.

FAQs

What type of battery does the Mitsubishi Eclipse Cross key fob use?

The Mitsubishi Eclipse Cross key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No special tools are required. You only need a flathead screwdriver.

How often should I replace my key fob battery?

Key fob batteries typically last between 1-2 years. Replace the battery as soon as you notice a decrease in performance.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or a store that accepts battery disposals.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from various retailers, including Amazon.

Thank you for reading this guide. We hope it helps you effortlessly replace the battery in your Mitsubishi Eclipse Cross key fob. For more information and detailed guides, visit FobBattery.com.