Mitsubishi Endeavor Key Fob Battery Replacement Guide

Introduction to Key Fob Battery Replacement

Replacing the battery in your Mitsubishi Endeavor key fob is a straightforward process that can save you time and money. This guide will walk you through each step to ensure you can do it yourself in under five minutes.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you get started, gather the following tools and materials:

  • Flathead screwdriver
  • Small Phillips head screwdriver or precision screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can purchase one from Amazon.

Step-by-Step Battery Replacement Process

Step 1: Remove the Screw

First, locate the small screw on the back of your key fob. Use your small Phillips head screwdriver to remove it. Set the screw aside in a safe place.

Step 2: Open the Key Fob

Once the screw is removed, you should be able to pull the key fob apart with your fingers. If it feels stuck, use your flathead screwdriver to gently pry it open at the corner where the key ring attaches.

Step 3: Remove the Old Battery

Inside the key fob, you will see the old CR2032 battery. Use your flathead screwdriver to gently lift the battery out. If the battery is difficult to remove, try using a smaller precision screwdriver or even a bobby pin.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Place the battery into the slot and press it down gently to secure it.

Step 5: Reassemble the Key Fob

Now, reassemble the key fob by aligning the two halves. If you have a key ring or keychain, attach it to the small post on the corner before snapping the fob back together. Finally, reinsert the screw and tighten it with your screwdriver.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Benefits of DIY Key Fob Battery Replacement

Replacing your key fob battery yourself has several advantages:

  • Cost-effective
  • Quick and easy
  • Avoids dealership fees

By doing it yourself, you save money and time, making it the best option for most car owners.

Common Issues and Troubleshooting

While the process is generally straightforward, you might encounter a few issues:

  • Difficulty opening the key fob
  • Battery not fitting properly
  • Key fob not working after replacement

If you experience any of these issues, double-check the steps or consult the FobBattery website for more detailed guides and troubleshooting tips.

Additional Resources

For more information on key fob battery replacements, visit the fobbattery.com. You can also find specific guides for different Mitsubishi models, such as the Mitsubishi Endeavor.

Frequently Asked Questions

What type of battery does the Mitsubishi Endeavor key fob use?

The Mitsubishi Endeavor key fob uses a CR2032 battery.

Where can I purchase a CR2032 battery?

You can purchase a CR2032 battery from Amazon at a reasonable price.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How often should I replace the key fob battery?

Typically, a key fob battery lasts around 2-3 years. Replace it when you notice a decrease in range or if the key fob stops working.

What if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, ensure the battery is correctly installed with the positive side facing down. If the issue persists, consult a professional or visit the FobBattery website for further assistance.

Can I use a different type of battery?

It’s recommended to use a CR2032 battery as specified. Using a different type may not provide the same performance and could potentially damage the key fob.

Do I need any special tools to replace the battery?

All you need are a flathead screwdriver and a small Phillips head screwdriver or precision screwdriver. These tools are easily available and inexpensive.

Conclusion

Replacing the battery in your Mitsubishi Endeavor key fob is a simple task that can save you a trip to the dealership. With just a few tools and a new CR2032 battery, you can have your key fob working like new in minutes. For more guides and resources, visit FobBattery and explore their extensive collection of key fob battery replacement tutorials.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.