Nissan Armada Key Fob Battery Replacement Guide (2008 – 2020)

Introduction

Replacing the battery in your Nissan Armada key fob is a simple process that can save you time and money. In this guide, I’ll walk you through the steps to replace the battery in your key fob, whether you have the three-button, four-button, or five-button version.

You’ll need a CR2032 coin battery and a flathead screwdriver. If you don’t have these items, they are easily available online. Let’s get started!

Tools and Materials Needed

Before we dive into the steps, make sure you have the following tools and materials:

• CR2032 coin battery
• Flathead screwdriver

If you need to purchase these items, you can find them on Amazon. Check the links in the description for easy access to these products.

Step-by-Step Battery Replacement

Step 1: Remove the Internal Key

The first step is to remove the internal key from the key fob. To do this, hold down the small latch on the back of the key fob while pulling out the internal key. This will give you access to the battery compartment.

Step 2: Open the Key Fob

Next, look at the bottom of the key fob. On the right side, you’ll see a small indentation. Insert your flathead screwdriver into this indentation. Use a smaller-sized flathead screwdriver to avoid damaging the key fob. Twist the screwdriver gently to start opening the key fob.

Work your way around the key fob, twisting the screwdriver until the two halves come apart. Be gentle to avoid breaking any plastic components.

Step 3: Remove the Old Battery

With the key fob open, you’ll see the old CR2032 battery. Use the same flathead screwdriver to gently pry the battery out of its compartment. Be careful not to damage any of the internal components while doing this.

Step 4: Insert the New Battery

Take your new CR2032 battery and make sure the positive side (marked with a plus sign) is facing down. Snap the new battery into place. Ensure it is securely seated in the compartment.

Step 5: Reassemble the Key Fob

Now that the new battery is in place, it’s time to reassemble the key fob. Align the two halves of the key fob and press them together until they click into place. Make sure all edges are securely closed.

Finally, insert the internal key back into the key fob. Your key fob should now be working with the new battery installed!

Benefits of DIY Key Fob Battery Replacement

Replacing the battery in your key fob yourself has several benefits:

• Save money
• Quick process
• Convenience

By following this guide, you can avoid the high costs of having a dealership replace the battery for you. The process takes less than five minutes and can be done with basic tools.

FAQ

What type of battery does the Nissan Armada key fob use?

The Nissan Armada key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

The battery typically lasts 1-2 years, depending on usage. Replace it when you notice a decrease in range or if the key fob stops working.

Can I use any flathead screwdriver?

It’s best to use a smaller-sized flathead screwdriver to avoid damaging the key fob. If you don’t have one, you can purchase a precision screwdriver set online.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or following local disposal regulations for electronic waste.

Is the process the same for all Nissan Armada key fob versions?

Yes, the process is the same for the three-button, four-button, and five-button versions of the Nissan Armada key fob.

Conclusion

Replacing the battery in your Nissan Armada key fob is a quick and easy process that can save you time and money. By following the steps outlined in this guide, you can ensure your key fob is always functioning properly.

If you found this guide helpful, feel free to leave a comment or like the post. For more tutorials on key fob battery replacements, visit our website or subscribe to our channel. We have videos and guides for almost every make and model out there.

Thank you for reading, and happy driving!