Introduction
Replacing the battery in your Nissan Cube key fob is a straightforward process that you can easily complete at home. This guide will walk you through the necessary steps, tools, and tips to ensure your key fob is back in working order. The entire process takes less than five minutes and requires minimal tools.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before you begin, gather the following tools and materials:
- Flathead screwdriver
- Small Phillips head screwdriver
- CR1620 battery
You can purchase the CR1620 battery on Amazon for just a few dollars.
Step-by-Step Instructions
Step 1: Remove the Back Screw
Using the small Phillips head screwdriver, remove the screw located on the back of the key fob. Set the screw aside in a safe place to avoid losing it.
Step 2: Open the Key Fob
Switch to the flathead screwdriver and locate the slot on the top right of the device. Insert the flathead screwdriver into this slot and twist gently to open the key fob. This will give you access to the battery compartment.
Step 3: Remove the Old Battery
Using the Phillips head screwdriver or any thin instrument like a pen, toothpick, or needle, carefully pry out the old battery. Dispose of the old battery properly.
Step 4: Insert the New Battery
Take your new CR1620 battery and ensure the positive side (marked with a plus sign) is facing down. Insert the battery into the compartment and press it down until it is securely in place.
Step 5: Reassemble the Key Fob
Align the two halves of the key fob and snap them back together. Finally, reinsert the screw and tighten it using the Phillips head screwdriver.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Why Replace the Battery Yourself?
Replacing the key fob battery yourself can save you both time and money. Dealerships often charge a significant amount for this simple task, but you can do it at home for the cost of the battery. Additionally, it ensures your key fob is always ready to use.
Additional Tips
Here are some additional tips to keep in mind:
- Always handle the battery with care to avoid short-circuiting.
- Dispose of the old battery according to local regulations.
- If your key fob stops working, try replacing the battery before considering other issues.
Other Resources
If you need more information or assistance with other key fobs, visit FobBattery. They offer a wide range of guides and resources for different makes and models. For Nissan vehicles specifically, check out their Nissan Key Fobs Guide.
FAQs
How long does the battery replacement take?
The entire process takes less than five minutes from start to finish.
What type of battery do I need?
You need a CR1620 battery for the Nissan Cube key fob.
Can I use other tools if I don’t have a precision screwdriver?
Yes, you can use any small Phillips head screwdriver and flathead screwdriver you have on hand.
Where can I buy the CR1620 battery?
You can purchase the CR1620 battery on Amazon.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Is this process the same for other Nissan models?
While the process is similar, it may vary slightly for other models. Consult specific guides for your vehicle on FobBattery.
Conclusion
Replacing the battery in your Nissan Cube key fob is a quick and easy task that can save you money and keep your key fob functioning properly. With just a few tools and a new battery, you can complete this process in minutes. For more guides and resources, visit FobBattery.