Nissan Kicks Key Fob Battery Replacement Guide (2018 – 2021)

Introduction

Replacing the battery in your Nissan Kicks key fob is a simple task that you can complete in just a few minutes. With the right tools and a bit of guidance, you can avoid the high costs of dealership services. This guide will walk you through the process step-by-step.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you begin, make sure you have the necessary tools and materials. You will need:

  • Flathead screwdriver
  • CR2032 battery

You can easily find these items online. For convenience, you can purchase the CR2032 battery from Amazon.com.

Step-by-Step Battery Replacement

Follow these steps to replace the battery in your Nissan Kicks key fob:

Step 1: Remove the Internal Key

Flip the key fob over and locate the lever or latch on the back. Hold it down while pulling out the internal key. This will give you access to the battery compartment.

Step 2: Open the Key Fob

Look at the bottom right side of the key fob. You will see a small opening. Insert a flathead screwdriver into this opening and twist gently to start opening the fob. Continue twisting and working your way down until the fob is open. Be careful not to damage the plastic.

Step 3: Remove the Old Battery

Once the fob is open, use the same flathead screwdriver to gently pry the old battery out. Dispose of the old battery properly.

Step 4: Insert the New Battery

Take your new CR2032 battery and make sure the positive side (marked with a plus sign) is facing down. Push it into place until it is secure.

Step 5: Reassemble the Key Fob

Squeeze the two halves of the key fob back together until they snap into place. Reinsert the internal key, and you are done!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Why DIY Battery Replacement?

Performing a DIY battery replacement can save you a significant amount of money. Dealerships often charge high fees for this simple task. By following this guide, you can achieve the same result for just the cost of the battery.

Additional Resources

If you have other key fobs that need battery replacements, we have a wealth of tutorials available. Our website, FobBattery, provides guides for almost every make and model. For specific information on Nissan key fobs, visit our Nissan Key Fobs Guide.

FAQs

How often should I replace my key fob battery?

Typically, key fob batteries last between 2 to 3 years. However, this can vary based on usage and environmental factors.

What should I do if my key fob still doesn’t work after replacing the battery?

Ensure that the battery is installed correctly with the positive side facing down. If the problem persists, the key fob itself might be faulty, requiring further inspection or replacement.

Can I use any CR2032 battery?

Yes, any CR2032 battery should work. However, it is recommended to use a high-quality battery to ensure longevity.

Is it safe to replace the key fob battery myself?

Yes, it is safe as long as you follow the instructions carefully. Use the appropriate tools to avoid damaging the key fob.

Where can I find more guides like this?

For more guides on key fob battery replacements, visit our website FobBattery. We offer comprehensive tutorials for a wide range of vehicles.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Nissan Kicks key fob is a straightforward process that can save you time and money. With just a flathead screwdriver and a new CR2032 battery, you can complete this task in minutes. For more information and additional guides, visit FobBattery.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.