Introduction
Replacing the battery in your Nissan NV200 key fob is a simple and quick task that you can do yourself. In this guide, I will walk you through the step-by-step process to change the battery in under five minutes. This DIY project will save you both time and money compared to visiting a dealership.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before we get started, you’ll need to gather a few tools and materials. Here’s what you’ll need:
- Flathead screwdriver
- Small Phillips head screwdriver
- CR1620 battery
If you don’t have a CR1620 battery on hand, you can easily purchase one online. I recommend checking out the first link in the description to get a great deal on Amazon.
Step 1: Remove the Back Screw
The first step in replacing your key fob battery is to remove the screw on the back of the fob. For this, you’ll need a small precision screwdriver. If you don’t have one, I recommend a set that includes six precision screwdrivers, which you can also find on Amazon.
Here’s how to do it:
- Locate the screw on the back of the key fob.
- Use your small Phillips head screwdriver to carefully remove the screw.
- Set the screw aside in a safe place to avoid losing it.
Step 2: Open the Key Fob
With the screw removed, the next step is to open the key fob to access the battery. This is where your flathead screwdriver comes in handy.
Follow these steps:
- Find the slot on the side of the key fob.
- Insert the flathead screwdriver into the slot.
- Twist the screwdriver gently to open the key fob.
Once the key fob is open, you’ll have access to the battery compartment.
Step 3: Remove the Old Battery
Now that the key fob is open, you can remove the old battery. If you don’t have a small tool to pry the battery out, you can use a pin, needle, or even a toothpick.
Here’s how to remove the old battery:
- Locate the battery in the compartment.
- Use your precision screwdriver or a small tool to gently lift the battery from the corner.
- Remove the old battery and dispose of it properly.
Step 4: Insert the New Battery
With the old battery removed, it’s time to insert the new CR1620 battery. Make sure you have the correct orientation for the battery before placing it in the compartment.
Follow these steps:
- Take the new CR1620 battery.
- Ensure the positive side, marked with a plus sign, is facing down.
- Place the battery in the compartment and press it down gently.
Step 5: Reassemble the Key Fob
Once the new battery is in place, you can reassemble the key fob. This step is straightforward and doesn’t take much time.
Here’s how to do it:
- Snap the two pieces of the key fob back together.
- Reinsert the screw you set aside earlier.
- Use your small Phillips head screwdriver to secure the screw.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
And that’s it! You’ve successfully replaced the battery in your Nissan NV200 key fob. This simple process takes just a few minutes and can save you the hassle and expense of visiting a dealership. I hope this guide was helpful and saved you some money.
If you found this tutorial useful, please give it a like or let me know in the comments section. Remember, if you need help with any other key fobs, you can always visit our channel or our website, fobbattery.com, for more tutorials and information.
FAQ
How often should I replace my key fob battery?
Typically, a key fob battery lasts between 1-2 years. If you notice a decrease in range or if the key fob stops working, it’s time to replace the battery.
Can I use a different battery model?
It’s crucial to use the specified CR1620 battery for your Nissan NV200 key fob. Using a different model may not work correctly and could damage the key fob.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide, and you’ll have no issues.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, ensure the battery is installed correctly. If the problem persists, there might be an issue with the key fob itself, and you may need professional assistance.
Do I need any special tools?
You’ll need a flathead screwdriver and a small Phillips head screwdriver. If you don’t have these, you can buy a precision screwdriver set online.
Can I use a coin to open the key fob?
While a coin might work, it’s best to use a flathead screwdriver for better control and to avoid damaging the key fob.
Where can I buy the CR1620 battery?
You can purchase the CR1620 battery online from various retailers. I recommend checking out the link in the description for a great deal on Amazon.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored