Nissan Rogue Key Fob Battery Replacement Guide (2008 – 2020)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Nissan Rogue key fob is an essential maintenance task. This guide will walk you through the steps needed to replace the battery in key fobs for models from 2008 to 2020. Whether you have a two-button or three-button key fob, the process remains the same.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Required

Before starting the replacement process, gather the necessary tools and materials. You will need:

  • CR2032 battery
  • Flathead screwdriver

If you don’t have a CR2032 battery, you can purchase one from Amazon or other retailers. Ensure you have a smaller-sized flathead screwdriver for ease of use.

Step-by-Step Battery Replacement

Follow these steps to replace the battery in your Nissan Rogue key fob:

Remove the Internal Key

Start by flipping the key fob over. Locate the lever on the back and hold it down while pulling out the internal key. This will expose the internal components of the key fob.

Open the Key Fob

Next, find the small indentation at the bottom of the device. Insert the flathead screwdriver into this area and gently push down and twist. This will start to open the key fob along the sides. Work your way down the opening, twisting gently to avoid damaging the plastic.

Access the Battery

Once the key fob is open, use the flathead screwdriver to carefully pry up the existing battery. If your key fob contains a CR2025 battery, note that both CR2025 and CR2032 batteries are compatible. However, the CR2032 battery is recommended for its longer life.

Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing down. Snap the battery into place within the key fob. Confirm that it is securely positioned.

Reassemble the Key Fob

Finally, reattach the two halves of the key fob by squeezing them back together. Insert the internal key back into its slot. Your key fob should now be functional with the new battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Additional Resources

For more detailed guides and resources, consider visiting FobBattery. They offer a comprehensive database of key fob batteries and replacement guides for various vehicles.

Common Questions and Troubleshooting

Here are some frequently asked questions and troubleshooting tips for replacing your Nissan Rogue key fob battery:

Can I use a different type of battery?

While the CR2032 is recommended, a CR2025 battery can also fit. However, the CR2032 has a longer battery life.

What if my key fob doesn’t work after replacing the battery?

Ensure the battery is correctly oriented with the positive side facing down. Double-check that the key fob is properly reassembled.

Where can I buy a replacement battery?

You can purchase a CR2032 battery from various retailers, including Amazon.

Do I need to reprogram my key fob after replacing the battery?

No, replacing the battery does not require reprogramming the key fob. It should function as normal once the new battery is installed.

Conclusion

Replacing the battery in your Nissan Rogue key fob is a simple and quick process. With just a CR2032 battery and a flathead screwdriver, you can ensure your key fob remains functional. For more information and guides, visit FobBattery.

FAQ

What models does this guide cover?

This guide covers Nissan Rogue models from 2008 to 2020.

How often should I replace my key fob battery?

Key fob batteries typically last 1-2 years. Replace the battery when you notice reduced range or intermittent operation.

Can I follow this guide for other Nissan models?

Yes, the process is similar for other Nissan key fobs. For specific models, visit FobBattery.

Is it necessary to use a flathead screwdriver?

A flathead screwdriver is recommended for its precision in prying open the key fob. Other tools may not provide the same level of control.

What should I do if the key fob is damaged during the process?

If you damage your key fob, consider consulting a professional or contacting your local Nissan dealership for assistance.

Can I get professional help for replacing my key fob battery?

Yes, you can visit a professional or your local Nissan dealership for assistance with replacing your key fob battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

For more information and comprehensive guides, visit FobBattery.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.