Nissan Versa Key Fob Battery Replacement Guide (2013 – 2019)

Introduction

Replacing the battery in your Nissan Versa key fob is a straightforward process that can save you time and money. This guide will walk you through the steps needed to replace the battery for models from 2013 to 2019. Whether you have a three-button or four-button key fob, the process remains the same.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Tools and Materials Required

Before you begin, make sure you have the necessary tools and materials. Having these items on hand will make the process smoother and quicker.

  • CR1620 Battery
  • Small Phillips Head Screwdriver (Number 0)
  • Flathead Screwdriver

If you need a new battery, you can purchase one from Amazon or visit FobBattery for more options.

Step-by-Step Battery Replacement

Follow these simple steps to replace your key fob battery:

Step 1: Remove the Screw

Start by locating the screw on the back of the key fob. Use your Phillips head screwdriver to remove it. Set the screw aside in a safe place to avoid losing it.

Step 2: Open the Key Fob

Next, find the opening at the top of the key fob. Insert your flathead screwdriver into this opening and twist gently. This will start to crack open the fob. Continue to work your way down, twisting until the key fob comes apart easily.

Step 3: Remove the Old Battery

Once the key fob is open, locate the battery. Use your flathead screwdriver to carefully lift the battery out of its compartment. Be gentle to avoid damaging any components.

Step 4: Insert the New Battery

Take your new CR1620 battery and ensure the positive side (marked with a plus sign) is facing down. Place the battery into the compartment, making sure it sits flat and secure.

Step 5: Reassemble the Key Fob

Line up the two halves of the key fob and press them together until they snap into place. Finally, reinsert the screw you removed earlier and tighten it with your Phillips head screwdriver.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Additional Tips

Here are some extra tips to ensure a successful battery replacement:

  • Work in a well-lit area
  • Keep small parts organized
  • Test the key fob before reassembling

Why Replace Your Key Fob Battery?

A functioning key fob is crucial for the convenience and security of your vehicle. Replacing the battery can resolve issues like:

  • Unresponsive buttons
  • Reduced range
  • Intermittent functionality

For more information on key fob batteries, visit FobBattery’s Nissan Guide.

Common Issues and Troubleshooting

Even with careful handling, you may encounter some issues. Here are common problems and their solutions:

Key Fob Not Working After Battery Replacement

Ensure the battery is installed correctly with the positive side facing down. Double-check that the key fob is reassembled properly and the screw is tightened.

Buttons Still Unresponsive

If the buttons remain unresponsive, the issue might be with the key fob itself. Consider checking for any visible damage or contact a professional for further assistance.

FAQ

What type of battery does my Nissan Versa key fob use?

The Nissan Versa key fob uses a CR1620 battery.

Do I need any special tools to replace the battery?

You will need a small Phillips head screwdriver (Number 0) and a flathead screwdriver.

How often should I replace my key fob battery?

Key fob batteries typically last 1-2 years. Replace the battery when you notice reduced functionality.

Can I use a different type of battery?

It’s recommended to use a CR1620 battery to ensure compatibility and optimal performance.

Where can I buy a replacement battery?

You can purchase a replacement battery from Amazon.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Conclusion

Replacing the battery in your Nissan Versa key fob is a simple task that can be done in minutes with the right tools. By following this guide, you can ensure your key fob remains functional and reliable. For more guides and resources, visit FobBattery.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.