Introduction to Key Fob Battery Replacement
Replacing the battery in your Subaru Ascent key fob is a simple task that anyone can perform. The 2019 and 2020 models use a CR1620 battery. By following a few easy steps, you can ensure that your key fob continues to function smoothly.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before starting, gather the necessary tools and materials. Having everything on hand will make the process quicker and more efficient.
- Flathead screwdriver
- CR1620 battery
Step-by-Step Battery Replacement Guide
Follow these steps to replace the battery in your Subaru Ascent key fob:
Step 1: Locate the Indentation
First, find the small indentation on the corner of the key fob. This is where you will insert the flathead screwdriver to open the device.
Step 2: Insert and Turn the Screwdriver
Insert the flathead screwdriver into the indentation and turn it as if you were turning a key. This action will begin to separate the two halves of the key fob.
Step 3: Open the Key Fob
Once the key fob starts to open, use the screwdriver to twist and work your way down the opening. Continue until the back piece of plastic comes off completely. Set this piece aside.
Step 4: Remove the Button Housing
Inside the key fob, you’ll find the button housing, which also contains the battery. Carefully dump out this part to expose the battery.
Step 5: Target the Plastic Pieces
Several small plastic pieces hold the battery in place. Use the flathead screwdriver to target these pieces one by one. Pry them up gently to avoid damaging the components.
Step 6: Remove the Old Battery
With the plastic pieces loosened, you can now remove the old CR1620 battery. Use the corner of the flathead screwdriver to lift the battery out from its slot.
Step 7: Insert the New Battery
Take a new CR1620 battery and ensure the positive side (with text and battery information) faces down. Click the new battery into place.
Step 8: Reassemble the Key Fob
Reassembling the key fob is much easier than taking it apart. Line up all the components and click them back together. Ensure the button housing and back piece are securely in place.
Step 9: Test the Key Fob
Finally, test the buttons on your key fob to make sure everything works correctly. If the buttons respond as expected, you’ve successfully replaced the battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Why Regular Battery Replacement is Important
Regularly replacing the battery in your key fob is crucial for maintaining its functionality. A weak or dead battery can prevent you from locking or unlocking your vehicle, which can be inconvenient and frustrating.
Common Issues and Troubleshooting
Sometimes, even after replacing the battery, you might encounter issues. Here are a few troubleshooting tips:
- Ensure the battery is inserted correctly.
- Check for any loose components.
- Make sure the key fob is properly reassembled.
- Test the key fob near the vehicle.
Where to Buy CR1620 Batteries
CR1620 batteries are widely available. You can purchase them online or at most electronics stores. For convenience, consider buying from Amazon here.
Additional Resources
If you need further assistance or want to see more tutorials on key fob battery replacements, visit this guide. You can also find a variety of helpful videos on our YouTube channel.
FAQ
What type of battery does the Subaru Ascent key fob use?
The Subaru Ascent key fob for the 2019 and 2020 models uses a CR1620 battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
How often should I replace the key fob battery?
It’s advisable to replace the key fob battery every 1-2 years or when you notice a decrease in functionality.
Can I use a different type of battery?
No, you should use the specified CR1620 battery to ensure proper functionality and avoid potential damage.
What should I do if my key fob still doesn’t work after replacing the battery?
Double-check the battery installation, ensure all components are secure, and test the key fob near your vehicle. If issues persist, consult your vehicle’s manual or a professional.
Where can I find more tutorials?
You can find more tutorials on key fob battery replacements on our YouTube channel or visit our website at fobbattery.com.
Conclusion
Replacing the battery in your Subaru Ascent key fob is a straightforward process that can save you time and money. By following these steps, you can ensure your key fob remains functional and reliable. If you found this guide helpful, consider leaving a comment or liking the video. For more assistance, check out our other tutorials.