Introduction
Replacing the battery in your Subaru Forester key fob is a quick and easy process. This guide will walk you through the steps to replace the battery, ensuring your key fob works perfectly again.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools You Will Need
- CR2032 battery
- Small Phillips head screwdriver
Step-by-Step Instructions
Step 1: Gather Your Tools
Before you start, make sure you have all the necessary tools. You will need a CR2032 battery and a small Phillips head screwdriver. If you don’t have a suitable screwdriver, a precision screwdriver set can be very useful.
Step 2: Remove the Screws
Flip the key fob over to the back side. Use your small Phillips head screwdriver to remove the screws. Be careful not to drop the screws, as they are tiny and easy to lose. Set them aside in a safe place.
Step 3: Open the Key Fob
Once the screws are removed, gently separate the back piece of plastic from the key fob. This will reveal the old battery.
Step 4: Remove the Old Battery
Carefully slide the old battery out with your thumb. Dispose of the old battery properly, as it can be harmful to the environment.
Step 5: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (the side with the text) is facing up. Slide the new battery into place until it clicks in securely.
Step 6: Reassemble the Key Fob
Align the back piece of plastic with the key fob and press it back into place. Insert the screws and tighten them just enough to secure the back cover. Be careful not to overtighten.
Step 7: Test the Key Fob
Press the buttons on your key fob to ensure that the battery replacement was successful. The light on the key fob should illuminate, indicating that the battery is fully charged.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Additional Tips
- Keep a spare CR2032 battery handy for future replacements.
- Consider getting a precision screwdriver set for other small household tasks.
- Check your key fob battery regularly to avoid unexpected failures.
Common Questions
How often should I replace the key fob battery?
The battery life of a key fob can vary, but it’s generally a good idea to replace it every 1-2 years or when you notice the range of the key fob decreasing.
Can I use a different type of battery?
It’s best to use a CR2032 battery as recommended. Other types of batteries may not fit properly or provide the correct voltage.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What should I do if the key fob doesn’t work after replacing the battery?
Double-check that the battery is installed correctly with the positive side facing up. Ensure the back cover is securely in place and the screws are tightened properly.
Conclusion
Replacing the battery in your Subaru Forester key fob is a straightforward task that can save you time and money. By following these simple steps, you can ensure your key fob remains functional. If you have any questions or need further assistance, feel free to leave a comment or visit our website for more tutorials.