Introduction
In this guide, I will walk you through the process of changing the battery in your Subaru Impreza key fob. This tutorial covers models from 2015 to 2021. The key fob uses a CR2032 battery, which you can easily purchase online. Follow these simple steps to get your key fob working like new.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before we begin, ensure you have the following:
- CR2032 battery
- Flathead screwdriver
Once you have these items, you’re ready to start.
Step-by-Step Instructions
Step 1: Remove the Internal Key
First, turn the key fob over to the back. Hold down the silver button and remove the internal key. Set the key aside for now.
Step 2: Locate the Keyhole
Look at the area where the key was removed. Above the keyhole, you’ll see a small parallel slot. This is where you will insert your flathead screwdriver.
Step 3: Open the Key Fob
Insert the flathead screwdriver into the slot and twist. You will hear a popping sound, indicating that the back of the key fob is coming off. Continue twisting until the back is completely removed. Set the back cover aside.
Step 4: Remove the Battery
Now, you will see the circuit board and the battery. Hold the circuit board by the sides to avoid touching any delicate components. Use the flathead screwdriver to gently pry the battery out from the plastic housing. The battery will pop out easily.
Step 5: Insert the New Battery
Take your new CR2032 battery. Ensure the positive side (the side with the text) is facing up. Insert the bottom part of the battery first, then click the top into place. If you try to insert the top first, it will not fit correctly.
Step 6: Reassemble the Key Fob
Place the circuit board back into the key fob housing with the battery facing up. Be careful with the rubber components and buttons. Gently click the back cover into place.
Step 7: Test the Key Fob
Reinsert the internal key. Test the key fob by pressing a button to ensure the light turns on. If everything is working correctly, you have successfully replaced the battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Subaru Impreza key fob is a simple process that can save you time and money. With just a few tools and a new CR2032 battery, you can have your key fob functioning like new in minutes.
FAQs
What type of battery does the Subaru Impreza key fob use?
The Subaru Impreza key fob uses a CR2032 battery.
How often should I replace the key fob battery?
It’s recommended to replace the battery every 1-2 years, depending on usage.
Can I use a different type of battery?
No, it’s important to use a CR2032 battery to ensure proper functionality.
What should I do if the key fob still doesn’t work after replacing the battery?
Check to ensure the battery is inserted correctly. If the problem persists, the key fob may need further inspection by a professional.
Is it safe to open the key fob myself?
Yes, opening the key fob is safe if done carefully. Follow the steps outlined in this guide to avoid damaging any components.
How do I know if the battery needs replacing?
If the key fob’s range decreases or it stops working altogether, it’s likely time to replace the battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online from various retailers, including Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
I hope this guide was helpful. If you have any questions or need further assistance, feel free to leave a comment. Happy fixing!