Introduction
In this guide, I will walk you through the process of replacing the battery in your Subaru Tribeca key fob for models from 2008 to 2010. This task is straightforward and requires minimal tools. Let’s dive into the step-by-step instructions to ensure your key fob is functioning perfectly.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before we begin, make sure you have the necessary tools and materials. These include:
- CR1620 coin battery
- Flathead screwdriver
If you don’t have a CR1620 battery, you can easily get one from Amazon at a reasonable price.
Step-by-Step Instructions
Opening the Key Fob
First, locate the small indentation near the key ring attachment. This is where you will insert your flathead screwdriver.
- Hold the key fob loosely.
- Insert the flathead screwdriver into the indentation.
- Twist the screwdriver as if you were turning a key.
As you twist, the key fob will start to open. Continue twisting until the back piece of plastic comes off easily.
Removing the Internal Components
Once the key fob is open, turn it over and gently dump out the internal components. You should see the button module and the battery inside.
- Locate the four latches around the button module.
- Use the flathead screwdriver to lift each latch.
- After lifting all four latches, the button module will come apart.
Replacing the Battery
Now that you have access to the battery, follow these steps to replace it:
- Identify the small opening at the top of the button module.
- Insert the flathead screwdriver into the opening.
- Gently lift the battery out.
Take your new CR1620 battery and place it face down, with the positive side (the side with text) facing down. Click it back into place.
Reassembling the Key Fob
With the new battery in place, it’s time to reassemble the key fob:
- Align the button module and click it back together.
- Position the key part into the module.
- Reattach the back piece of the key fob.
Ensure that all parts are securely clicked back into place.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
And that’s it! You’ve successfully replaced the battery in your Subaru Tribeca key fob. If you found this guide helpful, feel free to let us know in the comments or by liking the video. For more key fob battery replacement guides, check out our other videos or visit us at FobBattery.com.
FAQ
What type of battery does my Subaru Tribeca key fob use?
Your Subaru Tribeca key fob uses a CR1620 coin battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
How often should I replace the battery in my key fob?
Typically, key fob batteries last between 2 to 3 years. If you notice a decrease in range or the key fob stops working, it’s time to replace the battery.
Can I use a different type of battery?
It’s recommended to use the specified CR1620 battery for optimal performance. Using a different type may not fit properly or could damage the key fob.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, double-check that the battery is installed correctly. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to consult a professional.
Where can I find more information on key fob battery replacements?
For more information and detailed guides on various key fob battery replacements, visit FobBattery.com.