Toyota Highlander Key Fob Battery Replacement (2020 – 2021)

Introduction

Replacing the battery in your Toyota Highlander key fob is a straightforward process. With just a few tools and a new CR2032 battery, you can do it yourself at home. This guide will walk you through each step, ensuring your key fob works perfectly again.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before starting, gather the following items:

  • CR2032 coin battery
  • Flathead screwdriver
  • Precision screwdriver (optional)
  • Paper clip or toothpick (optional)

Once you have these tools, you’re ready to begin.

Step-by-Step Instructions

Step 1: Remove the Internal Key

First, locate the small switch on the bottom of the key fob. Hold this switch down and pull out the internal key. This step is crucial as it gives you access to the inside of the key fob.

Step 2: Open the Key Fob

With the internal key removed, you’ll notice a larger hole, which is the keyhole. Perpendicular to the keyhole is a smaller slot. Insert a flathead screwdriver into this slot. Twist gently to crack open the key fob. Don’t worry about damaging it; the process requires minimal force.

Step 3: Remove the Battery Housing

Once the key fob is open, flip it over to dump out the component that houses the battery. Set this component aside for now.

Step 4: Pry Out the Old Battery

Look for a small indentation in the corner of the battery housing. Insert a flathead or precision screwdriver into this indentation to pry the battery up. You can also use a paper clip, toothpick, or bobby pin. Be gentle to avoid scratching the housing.

Step 5: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing up. Click the battery into place, making sure it sits securely in the housing.

Step 6: Reassemble the Key Fob

Place the battery housing back into the key fob. Align the pieces and click them back together. Insert the internal key back into its slot.

Step 7: Test the Key Fob

After reassembling, check if the key fob is working. Press any button and look for the light to come on. If the light illuminates, you’ve successfully replaced the battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Common Issues and Solutions

Key Fob Not Opening

If you’re having trouble opening the key fob, make sure you’re inserting the screwdriver into the correct slot. Applying gentle pressure should do the trick. If it still won’t open, try using a different flathead screwdriver.

Battery Not Coming Out

For a stubborn battery, use a smaller tool like a precision screwdriver or a paper clip. Be patient and avoid forcing the battery out, as this could damage the housing.

Key Fob Not Working After Replacement

If the key fob doesn’t work after replacing the battery, double-check that the battery is inserted with the positive side facing up. Ensure all components are aligned correctly before snapping the key fob back together.

FAQs

What type of battery does the Toyota Highlander key fob use?

The key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

Typically, the battery lasts 1-2 years. Replace it when the key fob starts to lose signal strength.

Can I use a different type of battery?

No, it’s important to use a CR2032 battery to ensure compatibility and proper function.

Do I need to reprogram the key fob after replacing the battery?

No reprogramming is required. The key fob should work immediately after replacing the battery.

Is there a specific way to dispose of the old battery?

Yes, dispose of the old battery at a designated recycling center for electronic waste.

Can I replace the battery myself, or do I need a professional?

You can easily replace the battery yourself by following these steps. No professional help is needed.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online or at most electronics stores. Amazon is a convenient option.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Toyota Highlander key fob is a simple DIY task. With a CR2032 battery and a few basic tools, you can have your key fob working like new in minutes. Remember to follow each step carefully and consult this guide whenever needed. Enjoy the convenience of a fully functional key fob without the hassle of visiting a dealership.

If you found this guide helpful, feel free to explore other key fob battery replacement tutorials. Many makes and models are covered, ensuring you have support for all your key fob needs.

Additional Resources

For more detailed guides and tutorials, visit our website at FobBattery.com. We offer comprehensive instructions for various vehicles, making it easy to maintain your key fobs. Browse our collection and keep your key fobs in top shape.

Thank you for reading, and happy DIY battery replacement!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.