Introduction to Key Fob Battery Replacement
Replacing the battery in your Toyota Tacoma key fob is a simple task that you can do at home. In this guide, I will walk you through each step to ensure you can replace the battery quickly and efficiently. You’ll need a CR2016 coin battery, which you can purchase online for just a few dollars.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Tools and Materials Needed
Before we start, let’s gather the necessary tools and materials. You will need:
- CR2016 coin battery
- Flathead screwdriver
With these items in hand, you’re ready to get started.
Step-by-Step Instructions
Locate the Indentation
The first step is to locate the indentation on the key fob. Look at the top of the device where the key ring attaches. You’ll see a small indentation in the plastic. This is where you’ll insert the flathead screwdriver.
Insert the Screwdriver
Once you’ve found the indentation, insert the flathead screwdriver. Make sure the back of the key fob is facing up, with the Toyota symbol visible. Gently twist the screwdriver to crack the key fob open. Lift off the back piece of plastic.
Remove the Internal Component
Inside the key fob, you’ll find a small black component. Carefully lift this component out, ensuring that the buttons do not fall out. Keep the key fob oriented the same way to avoid any issues.
Open the Battery Compartment
The battery is located inside the black component. You’ll see an arrow indicating where to open it. You can use a coin or the flathead screwdriver to open the compartment. Insert the tool into the designated area and twist to open it.
Remove the Old Battery
After opening the battery compartment, you’ll see the CR2016 battery. Use the flathead screwdriver to gently push the battery out from behind. Be careful not to damage any internal elements.
Insert the New Battery
Take your new CR2016 battery and ensure the positive side is facing up. Click the battery back into place. You should see the plus sign (+) facing up when the battery is correctly installed.
Reassemble the Key Fob
Now that the new battery is in place, it’s time to reassemble the key fob. Start by clicking the battery compartment back together. Next, carefully place the black component back into the key fob. Finally, snap the back piece of plastic onto the key fob.
Testing the Key Fob
After reassembling the key fob, test it to ensure it’s working correctly. Press the buttons to verify they respond as expected. If everything is functioning properly, you’ve successfully replaced the battery.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Common Issues and Troubleshooting
Sometimes, you might encounter issues even after replacing the battery. Here are some common problems and solutions:
- Key fob not working: Ensure the battery is correctly installed.
- Buttons not responding: Check if the internal components are properly aligned.
- Key fob falling apart: Make sure all parts are securely snapped together.
FAQs
What type of battery does the Toyota Tacoma key fob use?
The Toyota Tacoma key fob uses a CR2016 coin battery.
How often should I replace the key fob battery?
Typically, you should replace the key fob battery every 1-2 years, depending on usage.
Can I use a different type of battery?
No, you should only use a CR2016 battery to ensure compatibility and proper function.
What should I do if the key fob still doesn’t work after replacing the battery?
If the key fob doesn’t work after replacing the battery, double-check the battery orientation and ensure all components are correctly aligned. If issues persist, consult a professional.
Where can I buy a CR2016 battery?
You can purchase a CR2016 battery online, such as on Amazon, or at most electronics stores.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
Replacing the battery in your Toyota Tacoma key fob is a straightforward process that can save you time and money. By following these steps, you can easily replace the battery at home. If you found this guide helpful, feel free to leave a comment. For more key fob battery replacement tutorials, visit our website or check out our other videos.