Introduction
Replacing the battery in your Volkswagen Beetle key fob is a straightforward task. This guide will walk you through the process step-by-step. You’ll need a CR2032 battery and a flathead screwdriver. If you don’t have the battery, you can purchase it from Amazon using the link provided.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
- CR2032 battery
- Flathead screwdriver
Step-by-Step Instructions
Step 1: Open the Key Fob
First, locate the opening on the side of the key fob. Insert your flathead screwdriver into this opening and give it a twist. The key fob will start to open up. Carefully pull apart the two halves of the key fob.
Step 2: Remove the Circuit Board
Once the key fob is open, gently remove the circuit board. You can dump it out if needed and set it aside. This will give you access to the battery compartment.
Step 3: Remove the Old Battery
Locate the battery inside the key fob. There is a small space on the side of the battery. Use the corner of your flathead screwdriver to get under the battery and gently lift it up. Remove the old battery and dispose of it properly.
Step 4: Insert the New Battery
Before inserting the new battery, make sure the metal component inside the key fob is in place. If it fell out, locate the part with the curved piece of metal sticking up. Position it so that the curved piece is facing up and align it with the peg inside the key fob. Once aligned, push it down into place.
Now, take your new CR2032 battery and make sure the positive side is facing down. Place the battery in the compartment and push it down firmly.
Step 5: Reassemble the Key Fob
Carefully grab the circuit board and align it with the battery. The CR2032 battery should go directly on top of the circuit board. Once aligned, click the two halves of the key fob back together. Give it a squeeze to ensure it is securely closed.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Congratulations! You have successfully replaced the battery in your Volkswagen Beetle key fob. This process should take you under five minutes. If you found this guide helpful, feel free to let us know in the comment section or give this guide a like. For more tutorials on key fob battery replacements, visit our website at FobBattery.com or subscribe to our YouTube channel.
FAQs
What type of battery does the Volkswagen Beetle key fob use?
The Volkswagen Beetle key fob uses a CR2032 coin battery.
Do I need any special tools to replace the battery?
No, you only need a flathead screwdriver to open the key fob and remove the old battery.
How often should I replace the key fob battery?
It depends on usage, but generally, replacing the battery every 1-2 years is recommended.
Can I use any brand of CR2032 battery?
Yes, any brand of CR2032 battery will work as long as it fits the specifications.
What should I do if the key fob doesn’t work after replacing the battery?
Ensure that the battery is properly installed with the positive side facing down. Check that the circuit board is correctly aligned. If it still doesn’t work, consider consulting a professional.
Is it safe to replace the key fob battery myself?
Yes, replacing the key fob battery is a simple and safe process that can be done at home.
What should I do with the old battery?
Dispose of the old battery properly by taking it to a battery recycling center or following local disposal guidelines.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032