Introduction
Replacing the battery in your Volkswagen Jetta key fob is a straightforward process. This guide will walk you through the steps for models from 2011 to 2017. You don’t need any special tools, just a CR2032 battery.
There are two versions of the key fob that look almost identical. This guide covers the version with the indicator light in the top right corner. If your key fob has the indicator light in a different location, check the link in the description for the appropriate guide.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- CR2032 battery
- Optional: Coin for leverage
The CR2032 battery is inexpensive and can be easily purchased online. You can find a link to buy it on Amazon in the description.
Step-by-Step Instructions
Step 1: Flip Out the Key
Begin by flipping out the key from the fob. This will give you better access to the back section that needs to be removed.
Step 2: Remove the Back Section
Turn the key fob over. Hold the top section firmly as it will not be moving. Look at the area where the key was just flipped out from. You will see a small lip.
Use your thumb to push up on this lip. Apply pressure until the back section clicks off. If it’s difficult, you can use a large coin for better leverage. Insert the coin into the gap and twist to pop off the back section.
Step 3: Access the Battery
With the back section removed, you now have access to the battery. The battery is held in place by two small tabs at the top.
Apply a little pressure in the area of the tabs to release the battery. It should come out easily.
Step 4: Insert the New Battery
Take your new CR2032 battery. Ensure the positive side with the plus sign is facing up.
Slide it under the two tabs and click it into place. Make sure the battery is sitting flat and securely in the compartment.
Step 5: Reattach the Back Section
Line up the back section of plastic with the key fob. Firmly press it until it clicks back into place.
To verify that everything is working correctly, press one of the buttons on the key fob. The indicator light should come on if the battery is properly installed.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Volkswagen Jetta key fob is quick and easy. With just a CR2032 battery and a few minutes, you can ensure your key fob continues to function properly.
If you found this guide helpful, please leave a comment or like. For more key fob battery replacement guides, visit our website at fobbattery.com.
FAQs
What type of battery does the Volkswagen Jetta key fob use?
The Volkswagen Jetta key fob uses a CR2032 coin battery.
Do I need any tools to replace the battery?
No, you do not need any tools. However, a coin can be helpful for leverage.
How do I know if I installed the battery correctly?
Press one of the buttons on the key fob. If the indicator light comes on, the battery is installed correctly.
Where can I buy the CR2032 battery?
You can purchase the CR2032 battery online, such as on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What if my key fob has the indicator light in a different location?
If your key fob has the indicator light in a different location, check the link in the description for the appropriate guide.
How often should I replace the key fob battery?
It’s recommended to replace the key fob battery every 1-2 years, or when it starts to show signs of low battery.
Can I use a different type of battery?
No, you should use a CR2032 battery as it’s the specified type for the Volkswagen Jetta key fob.
What should I do if the key fob still doesn’t work after replacing the battery?
Ensure the battery is correctly installed with the positive side facing up. If it still doesn’t work, there may be another issue with the key fob.