Replacing the battery in your Honda HR-V key fob is a simple process that can be done quickly and without any tools. This guide will walk you through the steps to replace the battery in the smart key fob for Honda HR-V models from 2016 to 2020.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Identifying the Key Fob
First, it is essential to identify the correct key fob for your Honda HR-V. The key fob in question is the smart key type, which is used in models from 2016 to the present. This key fob is straightforward to open and replace the battery.
Removing the Valet Key
To begin, locate the small knob on the back of the key fob. This knob has an arrow pointing downward. Pull this knob towards you to release the internal valet key. Once the valet key is removed, you can use it to open the key fob.
Opening the Key Fob
With the valet key in hand, look for the seam that runs around the middle of the key fob. This seam is where the key fob splits into two pieces. Insert the valet key into the slot in the middle of the seam and twist it gently. The key fob will easily come apart into two pieces, revealing the battery inside.
Removing the Old Battery
Once the key fob is open, you will see the CR2032 battery. To remove the old battery, use the valet key or any flat tool to pop it out. It is easiest to start from the side with the two longer teeth holding the battery in place.
Inserting the New Battery
Take your new CR2032 battery and ensure that the positive side, marked with the lettering, is facing towards you. Slide the battery under the longer teeth first and then press it down into place. This ensures the battery is securely held in the key fob.
Reassembling the Key Fob
After inserting the new battery, align the two halves of the key fob and press them together until they snap back into place. Finally, insert the valet key back into its slot on the key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Where to Buy a CR2032 Battery
If you need to purchase a new CR2032 battery, you can find them easily online. I recommend getting your battery from Amazon.com for convenience and reliability.
FAQ
How often should I replace the key fob battery?
Typically, the battery in your key fob should last between 2 to 3 years. However, if you notice a decrease in the remote’s range or if it stops working altogether, it is time to replace the battery.
Can I use any CR2032 battery for my key fob?
Yes, any CR2032 battery will work for your Honda HR-V key fob. Make sure to check the positive and negative sides when inserting the new battery.
Do I need any special tools to open the key fob?
No special tools are required. You can use the valet key that comes with your key fob to open it.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob does not work after replacing the battery, ensure the battery is correctly installed. If it still does not work, there may be an issue with the key fob itself, and you may need to contact a professional for further assistance.
How do I know if the battery is installed correctly?
The positive side of the battery, marked with the lettering, should be facing towards you when installed. Ensure the battery is securely held by the longer teeth inside the key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
By following these simple steps, you can easily replace the battery in your Honda HR-V key fob and ensure it continues to function correctly. For more detailed guides and information, visit the official guide on keyfobreplacement.com.