Chrysler Aspen Key Fob Battery Replacement (2005 – 2009)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Chrysler Aspen key fob is a simple task that you can do at home. This process is applicable to key fobs used between 2005 and 2009. You only need a CR2032 coin battery, which you can easily purchase online.

In this guide, I will walk you through each step to ensure you can replace the battery with ease. Let’s get started!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before we dive into the replacement process, make sure you have the following tools and materials on hand:

  • Flathead screwdriver
  • CR2032 coin battery

With these items ready, you’re all set to begin the replacement process.

Step-by-Step Battery Replacement Guide

Locate the Slot

The first step is to find the small slot on the side of the key fob. This slot is where you will insert the flathead screwdriver to open the key fob.

Insert the Screwdriver

Hold the key fob firmly and insert the flathead screwdriver into the slot. Twist the screwdriver gently to start opening the key fob. A little twist is all it takes to get started.

Open the Key Fob

Once you have started the opening process, continue twisting the screwdriver down the side of the key fob until it comes apart. You can then use your fingers to pull it apart completely.

Remove the Rubber and Circuit Board

With the key fob open, carefully remove the rubber piece that contains the circuit board. Set it aside to access the battery compartment.

Remove the Old Battery

Using the screwdriver, gently lift the old CR2032 battery from the side. It should come out with very little effort.

Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing down. Click it into place inside the battery compartment.

Reassemble the Key Fob

Carefully place the rubber piece with the circuit board back into the key fob. Line up the two halves of the key fob and click them back together.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Final Checks

After reassembling the key fob, check to ensure everything is properly aligned and secure. Your key fob should now be functioning correctly with the new battery.

Additional Tips

  • Handle the circuit board carefully
  • Ensure the battery is properly oriented
  • Use minimal force when opening the key fob
  • Dispose of the old battery responsibly

Common Issues and Solutions

Key Fob Won’t Open

If you have difficulty opening the key fob, double-check that you are inserting the screwdriver into the correct slot. Apply gentle pressure and twist carefully.

Battery Not Fitting

If the new battery doesn’t fit, ensure it is the correct type (CR2032) and that it is oriented correctly with the positive side down.

Key Fob Not Working

If the key fob still doesn’t work after replacing the battery, check the alignment of the circuit board and ensure all components are securely in place.

Why Replace Your Key Fob Battery?

Replacing the key fob battery extends the life of your key fob and ensures it functions properly. A fresh battery provides a reliable signal to your vehicle, preventing lockout situations.

Where to Buy CR2032 Batteries

You can purchase CR2032 batteries from various online retailers. I recommend buying from Amazon for convenience and competitive pricing. You can find a link to purchase the batteries in the video description.

Conclusion

Replacing the battery in your Chrysler Aspen key fob is a straightforward process that anyone can do at home. With just a few tools and a new battery, you can ensure your key fob continues to work reliably.

If you found this guide helpful, consider sharing it with others who might benefit from it. For more information on key fob battery replacements for other makes and models, visit fobbattery.com.

FAQs

How often should I replace my key fob battery?

Typically, you should replace the battery every 1-2 years, depending on usage.

Can I use a different type of battery?

No, you should use a CR2032 battery for the Chrysler Aspen key fob.

What if my key fob still doesn’t work?

Check the battery orientation and ensure all components are properly aligned. If it still doesn’t work, there may be an issue with the key fob itself.

Is it safe to open the key fob myself?

Yes, as long as you handle the components carefully and follow the steps outlined in this guide.

Where can I dispose of the old battery?

Dispose of the old battery at a designated battery recycling facility or drop-off point.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.