Toyota Avalon Key Fob Battery Replacement (2013 – 2018)

Introduction

In this guide, I’ll walk you through the steps to replace the battery in your Toyota Avalon key fob. This process is simple and can be done at home. You’ll need a flathead screwdriver and a CR2032 battery. I’ll provide a link to purchase the battery online for convenience.

Let’s get started with the battery replacement process. Follow these instructions to ensure your key fob is functioning properly again.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before starting, gather the necessary tools and materials:

  • Flathead screwdriver
  • CR2032 battery

Once you have these items, you’re ready to proceed with the battery replacement.

Step-by-Step Battery Replacement

Remove the Internal Key

First, locate the small button on the side of the key fob. This button is labeled “push.” Hold down the button and pull out the internal key. Set the key aside for now.

Open the Key Fob

Next, look for a small slot near the keyhole. Insert the flathead screwdriver into this slot. Hold the key fob loosely and twist the screwdriver. This action will crack open the key fob, allowing you to lift off the back part. Set the back part aside.

Remove the Old Battery

Inside the key fob, you’ll see the battery. Use your thumb to hold the battery gently. With the flathead screwdriver, get in between the battery and the plastic behind it. Wiggle the tool gently to avoid damaging any components. The battery will eventually pop out.

Insert the New Battery

Take the new CR2032 battery and place it in the key fob. Push it down to get it in place, starting from the bottom and then clicking in the top. Ensure the battery sits in there nicely.

Reassemble the Key Fob

Now, reattach the back part of the key fob. Snap the two pieces together. Insert the internal key back into its slot. Test the key fob to ensure the light turns on, indicating the battery is properly installed and charged.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Toyota Avalon key fob is a straightforward process. By following these steps, you can save time and money by doing it yourself. If you found this guide helpful, let me know in the comments or give the video a like.

For more key fob battery replacement guides, check out our other videos or visit our website.

FAQs

What type of battery does the Toyota Avalon key fob use?

The Toyota Avalon key fob uses a CR2032 battery.

Where can I purchase a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver to replace the battery.

How do I know if the new battery is working?

After reassembling the key fob, test it by pressing a button. If the light turns on, the battery is working.

Can I damage the key fob while replacing the battery?

As long as you handle the components gently and follow the instructions, you should not damage the key fob.

How often should I replace the key fob battery?

Key fob batteries typically last several years. Replace the battery when you notice a decrease in functionality.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.