Introduction
Replacing the battery in your Chevrolet C/K key fob is a simple and quick process. Whether you have a C/K 1500, 2500, or 3500, this guide will walk you through the steps to get your key fob working again.
In this tutorial, I will show you how to replace the internal battery of your Chevrolet C/K key fob. The process is straightforward and should take you less than five minutes.
The only tools you will need are a coin and a CR2032 battery. If you don’t have a CR2032 battery, you can easily purchase one online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials
- Coin or flathead screwdriver
- CR2032 battery
Ensure you have these items ready before starting the replacement process.
Step-by-Step Guide
Step 1: Locate the Indentation
First, find the small indentation on the bottom right side of your key fob. This is where you will insert your coin or flathead screwdriver to open the device.
Step 2: Open the Key Fob
Insert the coin into the indentation and give it a gentle twist. The key fob should open easily. If you prefer, you can use a flathead screwdriver, but a coin generally works better for this task.
Step 3: Remove the Old Battery
Once the key fob is open, you will see the old battery. You can try to remove it with your fingernail, but if that doesn’t work, use a flathead screwdriver or another small tool like a pen or pencil.
There is a small indentation next to the battery that will help you pry it out. Insert your tool into this indentation and gently lift the battery out of its compartment.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign and text) is facing down. Place the battery into the compartment, making sure it is seated correctly.
Step 5: Reassemble the Key Fob
After inserting the new battery, reattach the two halves of the key fob by squeezing them together. Ensure they snap back into place securely.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! Your key fob should now be working with the new battery. This process is quick and easy, taking less than five minutes from start to finish.
If you found this guide helpful, feel free to let me know in the comments or by liking this post. For more key fob tutorials, visit our website or check out our other videos.
FAQ
What if my key fob still doesn’t work after replacing the battery?
If your key fob isn’t working after replacing the battery, ensure the battery is seated correctly and the positive side is facing down. If it still doesn’t work, the key fob itself might be damaged and may need replacement.
Can I use a different type of battery?
No, it’s important to use a CR2032 battery as specified. Other types of batteries may not fit or work properly in your key fob.
Where can I buy a CR2032 battery?
CR2032 batteries are widely available online and in stores. You can purchase them from Amazon or any local electronics store.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often do I need to replace the key fob battery?
The battery life of a key fob can vary, but typically, you may need to replace it every 1-2 years. Signs that the battery is dying include reduced range or the key fob not working consistently.
Can I use a flathead screwdriver instead of a coin?
Yes, you can use a flathead screwdriver if you don’t have a coin. However, a coin generally works better and is less likely to damage the key fob.
Is this guide applicable to other models?
This guide specifically applies to Chevrolet C/K models from 1997 to 1999. However, the process may be similar for other models. Always check your vehicle’s manual for specific instructions.
What should I do with the old battery?
Dispose of the old battery properly by taking it to a recycling center or a store that accepts battery recycling. Do not throw it in the trash.
Can I take my key fob to a professional for battery replacement?
Yes, you can take your key fob to a professional if you are not comfortable replacing the battery yourself. However, the process is simple enough to do at home.
Replacing the battery in your Chevrolet C/K key fob is a simple task that can save you time and money. With this guide, you should have no trouble getting your key fob back in working order. Happy driving!