Introduction
Replacing the battery in your Audi S8 key fob is a straightforward process that you can easily do at home. This guide will walk you through each step to ensure you can replace the battery quickly and efficiently.
The only tool you’ll need is a new CR2032 coin battery. If you don’t have one, you can purchase it online. Let’s dive into the steps to get your key fob working like new again.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Required Tools and Materials
- CR2032 coin battery
- Your Audi S8 key fob
Step-by-Step Guide
Step 1: Prepare Your Key Fob
First, locate the buttons on the metal part of your key fob. These buttons are essential for opening the key fob.
Hold down both buttons simultaneously and pull out the key. This will reveal additional buttons underneath.
Step 2: Access the Battery Compartment
After removing the key, you will see two more buttons, one on each side of the fob. Press down both buttons.
While holding these buttons, pull on the bottom part of the key fob and wiggle it slightly. The bottom piece should come off, giving you access to the battery compartment.
Step 3: Remove the Old Battery
Once the bottom part is removed, you can easily take out the old battery. Make sure to note the orientation of the battery, as this will be important when inserting the new one.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side is facing down. Place the battery into the compartment.
Make sure it is securely in place before proceeding to the next step.
Step 5: Reassemble the Key Fob
With the buttons facing up, slide the bottom piece back into place. Ensure the battery remains facing down during this process.
Click the bottom part all the way down until it is secure. Finally, reattach the key by sliding it back into its original position.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And there you have it! Your Audi S8 key fob should now be working perfectly with its new battery. This simple process can save you time and money compared to visiting a dealership.
If you found this guide helpful, feel free to leave a comment or like. For more tutorials on key fob batteries, be sure to check out our other resources.
FAQ
What type of battery does the Audi S8 key fob use?
The Audi S8 key fob uses a CR2032 coin battery.
Can I replace the key fob battery myself?
Yes, replacing the key fob battery is a simple process you can do at home.
How long does the replacement process take?
The entire process should take just a few minutes.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online or at most electronic stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Will I need any special tools?
No special tools are required, just the replacement battery.
What if my key fob still doesn’t work after replacing the battery?
If the key fob doesn’t work, double-check the battery orientation and ensure all parts are securely in place.
Is there a warranty on the key fob battery?
Warranty details vary depending on where you purchase the battery. Check with the retailer for specific information.
Can I use a different type of battery?
It is recommended to use a CR2032 battery for optimal performance.
How often should I replace the key fob battery?
Key fob batteries typically last 1-2 years, but this can vary based on usage.