Chevrolet Equinox Key Fob Battery Replacement Guide (2018 – 2021)

Introduction

Replacing the battery in your Chevrolet Equinox key fob is a simple task that you can do at home. This guide will help you through the process step-by-step. Whether you have the three-button, four-button, or five-button version, the procedure remains the same and requires minimal tools.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials

Before you start, gather the following items:

  • Flathead screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can easily purchase one online. Here’s a link to buy the battery.

Step-by-Step Instructions

Step 1: Locate the Silver Button

Start by locating the silver button on the side of your key fob. Hold down this button and pull out the internal key.

Step 2: Open the Key Fob

Use the internal key to pry off the back piece of plastic. Insert the key into the keyhole and feel it lock into place. Pry gently until you see an opening on the seam of the plastic. If you don’t see an opening, adjust the key’s position slightly and try again.

Step 3: Remove the Old Battery

Once the key fob is open, use your flathead screwdriver to lift and remove the old battery. Dispose of it properly.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing down. Click it into place.

Step 5: Reassemble the Key Fob

Align the two pieces of the key fob and squeeze them together until they click. Finally, insert the internal key back into its slot.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Additional Tips

Here are some additional tips to ensure a smooth battery replacement process:

  • Work on a clean surface
  • Keep the key fob components organized
  • Handle the battery with care

Common Questions

What if my key fob still doesn’t work?

If your key fob doesn’t work after replacing the battery, double-check that the battery is installed correctly. Ensure the positive side is facing down.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from most electronics stores or online.

Can I use a different type of battery?

No, it’s essential to use a CR2032 battery to ensure proper functionality.

Conclusion

Replacing the battery in your Chevrolet Equinox key fob is straightforward and quick. With a flathead screwdriver and a CR2032 battery, you can complete the task in under five minutes. If you found this guide helpful, feel free to share your experience or ask questions in the comment section below.

FAQs

How often should I replace my key fob battery?

Typically, key fob batteries last between 1 to 2 years. Replace it when you notice a decrease in range or if the key fob stops working.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and easy. Just follow the steps outlined in this guide.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a battery recycling facility or a designated drop-off point.

Can I use a different tool instead of a flathead screwdriver?

Yes, you can use any similar tool that allows you to pry open the key fob. However, a flathead screwdriver is recommended for its ease of use.

Why is it important to ensure the positive side is facing down?

The key fob will not function if the battery is installed incorrectly. Ensuring the positive side is facing down guarantees proper operation.

Do all Chevrolet Equinox key fobs use the same battery?

Yes, all key fob versions (three-button, four-button, and five-button) for the Chevrolet Equinox use the CR2032 battery.

What if my key fob breaks during the process?

If your key fob breaks, you may need to purchase a replacement. Handle the key fob gently to avoid damage.

Can I get professional help to replace the battery?

Yes, you can visit a dealership or a professional locksmith if you prefer not to replace the battery yourself.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.