Chevrolet Sonic Key Fob Battery Replacement Guide (2019 – 2020)

Introduction

Replacing the battery in your Chevrolet Sonic key fob is a simple task that can save you a trip to the dealership. In this guide, I’ll walk you through the steps to replace the battery in your key fob, which should take you under five minutes. All you need is a flathead screwdriver and a CR2032 battery.

Required Tools and Materials

Before starting, make sure you have the following items:

• Flathead screwdriver
• CR2032 battery

If you don’t have a CR2032 battery, you can easily purchase one online. Check the link in the description to buy it from Amazon.

Step-by-Step Battery Replacement

Step 1: Open the Key Fob

To begin, turn your key fob over to the back. Look for the opening near the key ring attachment. This is where you’ll insert your flathead screwdriver.

Gently insert the screwdriver into the slot and pry until you hear a crack. This indicates that the key fob is starting to open. Be careful not to pull it apart forcefully to avoid damaging the plastic.

Step 2: Pry the Key Fob Open

Once the initial crack appears, focus on the indentation under the lip of the key fob. Use your screwdriver to pry it open further. Continue pushing until the plastic piece holding the key fob together clicks off. Wiggle it out gently to avoid making any cracks.

Step 3: Remove the Old Battery

Inside the key fob, you’ll see the battery compartment. Use your flathead screwdriver to push down next to the small tab beside the battery. Wiggle the screwdriver gently to pry the battery up and out of the compartment.

Dispose of the old battery properly. Remember, you only need to replace the battery every couple of years.

Step 4: Insert the New Battery

Check that your new battery is a CR2032. Ensure the positive side, marked with a plus sign, faces up. Slide the battery under the larger plastic tab first, then click it under the smaller tab.

Step 5: Reassemble the Key Fob

With the new battery in place, align the back section of the key fob and squeeze it back together. Make sure it clicks into place securely.

Conclusion

Congratulations! You have successfully replaced the battery in your Chevrolet Sonic key fob. This simple task can save you time and money, ensuring your key fob works efficiently.

If you found this guide helpful, feel free to leave a comment or give it a like. For more tutorials on key fob maintenance, visit our website.

FAQs

What type of battery does the Chevrolet Sonic key fob use?

The Chevrolet Sonic key fob uses a CR2032 battery.

How often should I replace the battery in my key fob?

You typically need to replace the battery every couple of years.

Can I use a different type of battery?

No, it is recommended to use a CR2032 battery for optimal performance.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online, such as from Amazon.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver to replace the battery.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward.

What should I do with the old battery?

Dispose of the old battery properly, following local disposal regulations.

What if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, there may be another issue. Consider consulting a professional for further assistance.