Chevrolet Suburban Key Fob Battery Replacement (2015 – 2020)

Introduction

Replacing the battery in your Chevrolet Suburban key fob is a straightforward process that you can complete at home. You don’t need any special tools, and the entire process takes less than five minutes. This guide will walk you through each step to ensure your key fob is back in working order quickly.

Tools and Materials Needed

Before you begin, make sure you have the following items ready:

• Flathead screwdriver
• CR2032 battery

If you don’t have a CR2032 battery, you can easily purchase one on Amazon. Click here to buy the battery.

Step-by-Step Instructions

Follow these steps to replace the battery in your Chevrolet Suburban key fob:

Step 1: Remove the Internal Key

Find the button on the left side of your key fob. Hold it down and pull out the internal key. Set the key aside.

Step 2: Open the Key Fob

Locate the slot next to the keyhole. Insert your flathead screwdriver into this slot. Hold the key fob loosely in your hand and turn the screwdriver like you would turn a key. The key fob will click open, allowing you to pull it apart with your fingers.

Step 3: Access the Battery

Once the key fob is open, you’ll have access to the internal components, including the circuit board and the battery. If the circuit board falls out, make sure to place it back with the rubber components facing up.

Step 4: Remove the Old Battery

Use your flathead screwdriver to lift the old CR2032 battery out of its compartment. Dispose of the old battery properly.

Step 5: Insert the New Battery

Take the new CR2032 battery and insert it into the compartment with the positive side facing down. Ensure the battery snaps into place and sits flat in the compartment.

Step 6: Reassemble the Key Fob

Align the two halves of the key fob and squeeze them back together until they click into place. Finally, reinsert the internal key.

Conclusion

Your key fob should now be functioning with a fresh battery. This simple process saves you time and money compared to visiting a dealership. If you found this guide helpful, feel free to let us know in the comments or give us a like. For more tutorials on key fob maintenance for various makes and models, visit our website at fobbattery.com.

Frequently Asked Questions (FAQ)

What type of battery does the Chevrolet Suburban key fob use?

The Chevrolet Suburban key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No special tools are required. You only need a flathead screwdriver.

How long does it take to replace the battery?

The entire process takes less than five minutes.

What should I do if the circuit board falls out?

Make sure the rubber components are facing up and place the circuit board back into the key fob.

How do I know which side of the battery should face down?

The positive side of the CR2032 battery should face down.

Where can I purchase a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

Can I find more tutorials for different key fobs?

Yes, you can find tutorials for various makes and models on our website at fobbattery.com.