Chrysler PT Cruiser Key Fob Battery Replacement (2001 – 2005)

Introduction

In this guide, I will walk you through the simple process of replacing the battery in a Chrysler PT Cruiser key fob. This key fob model was used in PT Cruisers from 2001 to 2005 and requires two CR2016 batteries.

Replacing the batteries yourself is straightforward and can save you time and money. You can purchase the required batteries online. I’ve provided a link to Amazon for your convenience.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Tools and Materials Needed

  • Flathead screwdriver
  • Two CR2016 batteries

Step-by-Step Instructions

Step 1: Locate the Slot

First, find the small slot on the side of the key fob. This is where you will insert your tool to open the key fob.

Step 2: Insert the Tool

Next, take a flathead screwdriver and insert it into the slot. Turn the screwdriver like a key to create an opening between the two halves of the key fob.

Step 3: Separate the Halves

Continue twisting the screwdriver until the key fob comes apart easily. You should be able to separate the two halves with your fingers.

Step 4: Remove the Old Batteries

Inside, you will find two stacked CR2016 batteries. To remove the first battery, use your fingernail or the flathead screwdriver to get under the seam and lift it out. Set it aside.

Removing the Second Battery

The second battery can be a bit tricky. Push down on one side to make the other side pop up. Then, use your tool or fingernail to lift it out.

Step 5: Insert the New Batteries

Take your new CR2016 batteries and make sure the positive side faces up. Click the first battery into place.

Repeat the process for the second battery, stacking it on top of the first one with the positive side facing up.

Step 6: Reassemble the Key Fob

Finally, click the two halves of the key fob back together. Ensure they are securely snapped into place.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Conclusion

That’s it! You’ve successfully replaced the batteries in your Chrysler PT Cruiser key fob. If you found this guide helpful, feel free to leave a comment or give us a like.

For more information on changing the batteries in key fobs for any make or model, check out the rest of the videos on our YouTube channel or visit FobBattery.com. Thank you for reading!

FAQ

What tools do I need?

You will need a flathead screwdriver and two CR2016 batteries.

How long does the replacement process take?

The entire process should take about 5-10 minutes.

Can I use a different type of battery?

No, you should use CR2016 batteries as specified for this key fob model.

Do I need any special skills?

No, replacing the batteries is straightforward and does not require any special skills.

What if my key fob still doesn’t work?

Ensure the batteries are correctly installed with the positive side facing up. If it still doesn’t work, there could be another issue with the key fob.

Can I get professional help?

Yes, you can visit a professional if you are uncomfortable doing it yourself.

Is there a warranty on the batteries?

Warranty information depends on where you purchase the batteries. Check the seller’s return policy.

Where can I buy the batteries?

You can purchase the CR2016 batteries on Amazon.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.